Maricopa County, AZ

Pizzafarro's

Permit ID: FD-00750

Permit Type: E & D

36889 N Tom Darlington Dr Carefree 85377

*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
Violation
ID

Violation Description

Violation Comments

Correct By
06
Hands clean & properly washed
PRIORITY VIOLATION-2-301.14, P: When to Wash. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox---Handwashing. ............Employee answered phone then moved to back pasta prep area to continue working with portioned bags of chicken wings without first washing hands. Instructed employee to wash hands after contamination occurred and before working with food contact surfaces. Discussed proper handwashing with employees. FOOD EMPLOYEES shall clean their hands and exposed portions of their arms as specified under § 2-301.12 immediately before engaging in FOOD preparation including working with exposed FOOD, clean EQUIPMENT and UTENSILS, and unwrapped SINGLE SERVICE and SINGLE-USE ARTICLES and; (A) After touching bare human body parts other than clean hands and clean, exposed portions of arms; (B) After using the toilet room; (C) After caring for or handling SERVICE ANIMALS or aquatic animals as specified in ¶ 2-403.11(B); (D) Except as specified in ¶ 2-401.11(B), after coughing, sneezing, using a handkerchief or disposable tissue, using tobacco, eating, or drinking; (E) After handling soiled EQUIPMENT or UTENSILS; (F) During FOOD preparation, as often as necessary to remove soil and contamination and to prevent cross contamination when changing tasks; (G) When switching between working with raw FOOD and working with READY-TO-EAT FOOD; (H) Before donning gloves to initiate a task that involves working with FOOD; and (I) After engaging in other activities that contaminate the hands.
Corrected At Time Of Inspection
21
Proper date marking & disposition
Priority Foundation-3-501.17, Pf: Ready-To-Eat Time/Temperature Control for Safety Food - Date Marking. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4125/Food-SafetyOperator-Resources. .........In walk in cooler, two large containers of pizza sauce without proper date mark. Per employee, sauce was prepared 2 days ago. Instructed employee to properly date mark sauce. Discussed the importance of proper date marking of TCS foods stored in establishment >24 hours. (A) Except when PACKAGING FOOD using a REDUCED OXYGEN PACKAGING method as specified under § 3-502.12, and except as specified in ¶¶ (E) and (F) of this section, refrigerated, READY-TO -EAT, TIME/TEMPERATURE CONTROL FOR SAFETY FOOD prepared and held in a FOOD ESTABLISHMENT for more than 24 hours shall be clearly marked to indicate the date or day by which the FOOD shall be consumed on the PREMISES, sold, or discarded when held at a temperature of 5ºC (41ºF) or less for a maximum of 7 days. The day of preparation shall be counted as Day 1. (B) Except as specified in ¶¶ (E) -(G) of this section, refrigerated, READY-TO-EAT TIME/TEMPERATURE CONTROL FOR SAFETY FOOD prepared and PACKAGED by a FOOD PROCESSING PLANT shall be clearly marked, at the time the original container is opened in a FOOD ESTABLISHMENT and if the FOOD is held for more than 24 hours, to indicate the date or day by which the FOOD shall be consumed on the PREMISES, sold, or discarded, based on the temperature and time combinations specified in ¶ (A) of this section and: (1) The day the original container is opened in the FOOD ESTABLISHMENT shall be counted as Day 1; and (2) The day or date marked by the FOOD ESTABLISHMENT may not exceed a manufacturer’s use-by date if the manufacturer determined the use-by date based on FOOD safety.
Corrected At Time Of Inspection
Inspection Comments

This establishment is not participating in the award program at this time and had 1 Priority, 1 Priority Foundation and 1 Core Violations on this inspection. Core-2-102.12(A), C: Certified Food Protection Manager ............No certified food protection manager at establishment. Provide and maintain copy of food manager certification at establishment at all times. Via email, provided weblinks for information on obtaining food manager certification. (A) At least one EMPLOYEE that has supervisory and management responsibility and the authority to direct and control FOOD preparation and service shall be a certified FOOD protection manager who has shown proficiency of required information through passing a test that is part of an ACCREDITED PROGRAM. Discussion points with person in charge: handwashing, current illness policy, all handwashing sinks stocked with both hand drying towels/ handwashing soap, restrooms stocked with supplies, proper sanitizer for warewashing, and cleanliness of facility. Also discussed: kitchen door being left open, leaving wood pizza paddles on trash cans. Person in charge consented to inspection and reviewed inspections rights with person in charge: Palmer B. Routine inspection report was emailed to and Inspection Review Notice was handed to person in charge at establishment. Inspection report confirmed received. No County legal action will result from this inspection.


Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
Quick Search