Kyoto Bowl
Permit ID: FD-00764
Permit Type: E & D
1245 W Elliot Rd Suite 101 Tempe 85284
*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
49
Plumbing installed; proper backflow devices
Core-5-205.15 (B), C: System Maintained in Good Repair; Maintained
Observed standing water in floor drain under ice machine. Please correct.
Correct Prior To Next Routine Inspection
54
Adequate ventilation & lighting; designated areas used
Core-4-202.18, C: Ventilation Hood Systems, Filters
Observed accumulation of grease in the right side of the filters under the hood. Please clean.
Core-6-303.11, C: Intensity-Lighting
Observed low intensity lighting in the walk in freezer. The light intensity shall be at least 108 lux (10 foot candles) at a distance of 75 cm (30 inches) above the floor, in walk-in refrigeration units and dry food storage areas and in other areas and rooms during periods of cleaning. Please correct.
Correct Prior To Next Routine Inspection
Inspection Comments
This establishment is not participating in the award program at this time and had 0 Priority, 0 Priority Foundation and 3 Core Violations on this inspection. No County legal action will result from this inspection. Inspection was emailed
Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne
illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly
washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced
food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance
with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
