Kyoto Bowl
Permit ID: FD-00764
Permit Type: E & D
1245 W Elliot Rd Suite 101 Tempe 85284
*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
Not Participating
0
45
Food & non-food contact surfaces cleanable, properly designed, constructed, & used
Core-4-501.11, C: Good Repair and Proper Adjustment-Equipment -- Observed metal wire strainer that was starting to come apart. Discussed with employee about replacing to prevent metal bits from getting in food.
Correct Prior To Next Routine Inspection
47
Non-food contact surfaces clean
Core-4-602.13, C: Nonfood Contact Surfaces -- Observed build-up of ice on the floor and shelves in the walk in freezer. Clear away ice to protect food and prevent slipping or contamination.
Correct Prior To Next Routine Inspection
54
Adequate ventilation & lighting; designated areas used
Core-6-303.11, C: Intensity-Lighting -- Observed the lighting in the walk in freezer was not bright enough. Install a brighter bulb to be able to assess food safety.
Correct Prior To Next Routine Inspection
Inspection Comments
This establishment is not participating in the award program at this time and had 0 Priority, 0 Priority Foundation and 3 Core Violations on this inspection. No County legal action will result from this inspection. Inspection report sent by email.
Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne
illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly
washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced
food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance
with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
