Spirit In The Desert
Permit ID: FD-01309
Permit Type: E & D
7415 E Elbow Bend Carefree 85377
*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
A
0
31
Proper cooling methods used; adequate equipment for temperature control
Core-3-501.15 (B), C: Cooling Methods; Cooling containers. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. ........In walk in cooler, cooked potatoes/ 60*F cooling in closed ziploc bag. Ziploc bag was opened to continue the cooling process.
(B) When placed in cooling or cold holding EQUIPMENT, FOOD containers in which FOOD is being cooled shall be: (1) Arranged in the EQUIPMENT to provide maximum heat transfer through the container walls; and (2) Loosely covered, or uncovered if protected from overhead contamination, as specified under Subparagraph 3-305.11(A)(2), during the cooling period to facilitate heat transfer from the surface of the FOOD.
(A) Cooling shall be accomplished in accordance with the time and temperature criteria specified under § 3-501.14 by using one or more of the following methods based on the type of FOOD being cooled: (1) Placing the FOOD in shallow pans; (2) Separating the FOOD into smaller or thinner portions; (3)Using rapid cooling EQUIPMENT; (4) Stirring the FOOD in a container placed in an ice water bath; (5) Using containers that facilitate heat transfer; (6) Adding ice as an ingredient; or (7) Other effective methods.
Corrected At Time Of Inspection
45
Food & non-food contact surfaces cleanable, properly designed, constructed, & used
Core-4-501.12, C: Cutting Surfaces ..........On equipment storage shelf, cutting boards deeply scored, not allowing for a smooth and easily cleanable surface. Resurface or replace cutting boards.
Surfaces such as cutting blocks and boards that are subject to scratching and scoring shall be resurfaced if they can no longer be effectively cleaned and SANITIZED, or discarded if they are not capable of being resurfaced.
Correct Prior To Next Routine Inspection
Inspection Comments
This establishment received an A Grade and had 0 Priority, 0 Priority Foundation and 2 Core violations on this inspection. Person in charge consented to inspection and reviewed inspections rights with person in charge: Eric S. Routine inspection report was emailed to person in charge at establishment. Inspection report confirmed received. No County legal action will result from this inspection.
Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne
illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly
washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced
food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance
with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
