US Egg
Permit ID: FD-01417
Permit Type: E & D
131 E Baseline Rd Suite F Tempe 85283
*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
B
1
20
Proper cold holding temperatures
PRIORITY VIOLATION-3-501.16(A)(2) and (B), P: Time/Temperature Control for Safety Food, Cold Holding. .......Ham under temperature control, stacked high in pan in top of cold table above proper fill level, at 53*F internally. Manager stated ham had been put in pan less than one hour and returned it to the walk-in to re-cool. The ham in the lower part of the pan was properly cold. Please do not over-fill top cold table pans. Cold-held TCS food must be maintained 41*F or below. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.
Corrected At Time Of Inspection
Inspection Comments
This establishment received a B Grade and had one Priority, no Priority Foundation and no Core violations on this inspection. Reviewed proper two-tier cooling with manager and discussed back-flow requirements for the urn water connection. No County legal action will result from this inspection. Emailed report to Erica.
Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne
illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly
washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced
food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance
with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
