Safeway
Permit ID: FD-03394
Permit Type: E & D
1515 E Elliot Rd Tempe 85284
*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
Cutting Edge A+
0
54
Adequate ventilation & lighting; designated areas used
Core-6-303.11, C: Intensity-Lighting
-
Observed three non-working lights located in the vent hood above the ovens in the deli. Proper lighting levels must be available in all cooking areas. Replace bulbs prior to next routine inspection.
Correct Prior To Next Routine Inspection
Inspection Comments
This establishment is on the Cutting Edge of food safety and was awarded an “A+” grade. This establishment received an A+ Grade and had 0 Priority, 0 Priority Foundation and 2 Core violations on this inspection. Core-2-102.12(A), C: Certified Food Protection Manager Observed no Certified Food Manager (CFM) onsite at time of inspection. Person in charge was unable to produce a certified food protection manager certificate. A CFM is required to be on the premises during all hours of operations. Provide a CFM onsite by next routine inspection. Report e-mailed. No County legal action will result from this inspection.
Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne
illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly
washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced
food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance
with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
