Four Peaks Brewing Company
Permit ID: FD-03421
Permit Type: E & D
1340 E 8th St Suite 104 Tempe 85281
*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
Not Participating
0
53
Physical facilities installed, maintained, & clean
Core-6-201.11, C: Floors, Walls and Ceilings-Cleanability-----In the kitchen area, especially where the fryers are located, observed over 15 floor tiles that were missing, exposing the rough flooring underneath. PIC stated they will look into repairing these floors so that they are all smooth and easily cleanable.
Correct Prior To Next Routine Inspection
Inspection Comments
This establishment is not participating in the award program at this time and had 0 Priority, 0 Priority Foundation and 1 Core Violations on this inspection. No County legal action will result from this inspection. Aileen D. verbally acknowledged inspection rights. The Inspection Report was emailed and confirmed at time of inspection.
Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne
illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly
washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced
food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance
with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
