Maricopa County, AZ

Harolds Cave Creek Corral

Permit ID: FD-07896

Permit Type: E & D

6875 E Cave Creek Rd Cave Creek 85331

*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
B
1

Violation Description

Violation Comments

Correct By
14
Food-contact surfaces: cleaned & sanitized
PRIORITY VIOLATION-4-501.114, P: Manual and Mechanical Warewashing Equipment, Chemical Sanitization- Temperature, pH, Concentration and Hardness. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. ......... At patio bar, warewashing machine, at food contact surfaces, chlorine sanitizer with a concentration of 0ppm. Manager changed out empty sanitizer bottle, primed machine, and sanitizer ended with a concentration of 50-100ppm. Discussed more frequent monitoring of sanitizer solution throughout the day.
Corrected At Time Of Inspection
22
Time as a public health control: procedures & record
Priority Foundation-3-501.19 (A1, B2, C2-3), Pf: Time as a Public Health Control; Documentation. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4125/Food-SafetyOperator-Resources. ............. On cook line, par-baked pizza and garlic bread using time as a public health control not on time as a public health control procedures. Procedures were updated at time of inspection. (A) Except as specified under ¶ (D) of this section, if time without temperature control is used as the public health control for a working supply of TIME/TEMPERATURE CONTROL FOR SAFETY FOOD before cooking, or for READY-TO-EAT TIME/TEMPERATURE CONTROL FOR SAFETY FOOD that is displayed or held for sale or service: (1) Written procedures shall be prepared in advance, maintained in the FOOD ESTABLISHMENT and made available to the REGULATORY AUTHORITY upon request that specify: (a) Methods of compliance with Subparagraphs (B)(1)-(3) or C)(1)-(5) of this section; and (b) Methods of compliance with § 3-501.14 for FOOD that is prepared, cooked, and refrigerated before time is used as a public health control.
Corrected At Time Of Inspection
31
Proper cooling methods used; adequate equipment for temperature control
Priority Foundation-3-501.15 (A), Pf: Cooling Methods. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. ..........In walk in cooler, cooked rice/ 56*F prepared and stored in covered deep (>4inch) pan and sliced deli meats/ 47*F stored in covered shallow pans. Sliced deli meats were uncovered and cooked rice was portioned on to sheet pans and moved to walk in freezer to continue the cooling process. Discussed proper cooling methods with employees. (A) Cooling shall be accomplished in accordance with the time and temperature criteria specified under § 3-501.14 by using one or more of the following methods based on the type of FOOD being cooled: (1) Placing the FOOD in shallow pans; (2) Separating the FOOD into smaller or thinner portions; (3)Using rapid cooling EQUIPMENT; (4) Stirring the FOOD in a container placed in an ice water bath; (5) Using containers that facilitate heat transfer; (6) Adding ice as an ingredient; or (7) Other effective methods. (B) When placed in cooling or cold holding EQUIPMENT, FOOD containers in which FOOD is being cooled shall be: (1) Arranged in the EQUIPMENT to provide maximum heat transfer through the container walls; and (2) Loosely covered, or uncovered if protected from overhead contamination, as specified under Subparagraph 3-305.11(A)(2), during the cooling period to facilitate heat transfer from the surface of the FOOD.
Corrected At Time Of Inspection
33
Approved thawing methods used
Core-3-501.13, C: Thawing ..........At 3-compartment prep sink, packaged meat thawing in room temperature water. Employee turned on water to continue the thawing process. Except as specified in ¶ (D) of this section, TIME/TEMPERATURE CONTROL FOR SAFETY FOOD shall be thawed: (A) Under refrigeration that maintains the FOOD temperature at 5oC (41oF) or less; or (B) Completely submerged under running water: (1) At a water temperature of 21oC (70oF) or below, (2) With sufficient water velocity to agitate and float off loose particles in an overflow, and (3) For a period of time that does not allow thawed portions of READY-TO-EAT FOOD to rise above 5*C (41*F).
Corrected At Time Of Inspection
37
Contamination prevented during food preparation, storage & display
Core-3-307.11, C: Miscellaneous Sources of Contamination ...........Throughout kitchen, above cooking and prep surfaces, missing ceiling tiles, creating opening to attic. Repair ceiling tiles.
Correct Prior To Next Routine Inspection
Inspection Comments

This establishment received a B Grade and had 1 Priority, 2 Priority Foundation and 2 Core violations on this inspection. Reviewed with employees: storing of dry wiping cloths. Person in charge consented to inspection and reviewed inspections rights with person in charge: Lucio O. Routine inspection report was emailed to person in charge at establishment. Inspection report confirmed received. No County legal action will result from this inspection.


Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.