Safeway
Permit ID: FD-13552
Permit Type: Bakery
5035 W Baseline Ave Laveen 85339
*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
A
0
37
Contamination prevented during food preparation, storage & display
Core-3-305.11, C: Food Storage-Preventing Contamination from the Premises
--Observed multiple boxes of bakery items being stored on the floor of the walk-in freezer. Person in charge will make sure these items are moved up onto the shelves of the unit. Food items must be stored in a clean and dry area at least 6 inches off of the ground to prevent possible contamination.
Corrected At Time Of Inspection
Inspection Comments
This establishment received a(n) A Grade and had 0 Priority, 0 Priority Foundation and 1 Core violations on this inspection. Inspection rights reviewed with Ernest P. No County legal action will result from this inspection. Inspection report emailed.
Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne
illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly
washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced
food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance
with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
