Maricopa County, AZ

Carl's Jr

Permit ID: FD-51886

Permit Type: E & D

5040 W Baseline Rd Laveen 85339

*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
A
0

Violation Description

Violation Comments

Correct By
53
Physical facilities installed, maintained, & clean
Core-6-501.12, C: Cleaning, Frequency and Restrictions--- Observed organic build up on fan covers in walk-in refrigerator. Person in charge stated he will have fan covers cleaned before next routine inspection. PHYSICAL FACILITIES shall be cleaned as often as necessary to keep them clean.
Correct Prior To Next Routine Inspection
Inspection Comments

This establishment received a(n) A Grade and had 0 Priority, 0 Priority Foundation and 1 Core violations on this inspection. Additional AMC training and handouts can be found in English and Spanish at: https://www.maricopa.gov/4533/English-AMC-Toolbox ***The Inspection Report was emailed and confirmed at time of inspection*** Verbal acknowledgement for inspection rights by Eduardo O. No County legal action will result from this inspection.


Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.