Maricopa County, AZ

CIVANA Wellness Resort and Spa

Permit ID: FD-59432

Permit Type: E & D

37220 N Mule Train Rd Carefree 85377

*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant

Violation Description

Violation Comments

Correct By
06
Hands clean & properly washed
PRIORITY VIOLATION-2-301.14, P: When to Wash. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox---Handwashing. .........On cook line, employee handled raw salmon, removed gloves, then started working with food containers without first washing hands. In warewashing area, employee handled dirty dishes then clean dishes all with same gloved hands. Instructed both employees to wash hands and continue with task. Discussed the importance of proper handwashing and glove usage with employees. FOOD EMPLOYEES shall clean their hands and exposed portions of their arms as specified under § 2-301.12 immediately before engaging in FOOD preparation including working with exposed FOOD, clean EQUIPMENT and UTENSILS, and unwrapped SINGLE-SERVICE and SINGLE-USE ARTICLES and: (A) After touching bare human body parts other than clean hands and clean, exposed portions of arms; (B) After using the toilet room; (C) After caring for or handling SERVICE ANIMALS or aquatic animals as specified in ¶ 2-403.11(B); (D) Except as specified in ¶ 2-401.11(B), after coughing, sneezing, using a handkerchief or disposable tissue, using tobacco, eating, or drinking; (E) After handling soiled EQUIPMENT or UTENSILS; (F) During FOOD preparation, as often as necessary to remove soil and contamination and to prevent cross contamination when changing tasks; (G) When switching between working with raw FOOD and working with READY-TO-EAT FOOD; (H) Before donning gloves to initiate a task that involves working with FOOD; and (I) After engaging in other activities that contaminate the hands.
Corrected At Time Of Inspection
31
Proper cooling methods used; adequate equipment for temperature control
Core-3-501.15 (B), C: Cooling Methods; Cooling containers. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. ........In walk in cooler, tomatillo salsa/ 55*F prepared and cooling in covered containers. Instructed employee to partially uncover tomatillo salsa to continue the cooling process. Discussed proper cooling methods with employee. (B) When placed in cooling or cold holding EQUIPMENT, FOOD containers in which FOOD is being cooled shall be: (1) Arranged in the EQUIPMENT to provide maximum heat transfer through the container walls; and (2) Loosely covered, or uncovered if protected from overhead contamination, as specified under Subparagraph 3-305.11(A)(2), during the cooling period to facilitate heat transfer from the surface of the FOOD. (A) Cooling shall be accomplished in accordance with the time and temperature criteria specified under § 3-501.14 by using one or more of the following methods based on the type of FOOD being cooled: (1) Placing the FOOD in shallow pans; (2) Separating the FOOD into smaller or thinner portions; (3)Using rapid cooling EQUIPMENT; (4) Stirring the FOOD in a container placed in an ice water bath; (5) Using containers that facilitate heat transfer; (6) Adding ice as an ingredient; or (7) Other effective methods.
Corrected At Time Of Inspection
Inspection Comments

This establishment is not participating in the award program at this time and had 1 Priority, 0 Priority Foundation and 2 Core Violations on this inspection. Core-2-102.12(A), C: Certified Food Protection Manager ........No certified food protection manager at establishment. Provide and maintain copy of food manager certification at establishment at all times. (A) At least one EMPLOYEE that has supervisory and management responsibility and the authority to direct and control FOOD preparation and service shall be a certified FOOD protection manager who has shown proficiency of required information through passing a test that is part of an ACCREDITED PROGRAM. Discussion points with person in charge: handwashing, current illness policy, all handwashing sinks stocked with both hand drying towels/ handwashing soap, restrooms stocked with supplies, proper sanitizer for warewashing, and cleanliness of facility. Also discussed: test strips at both locations on property, storing of food/food contact surfaces directly on ground, cleaning of ice machine, consumer advisory, storage of raw and ready to eat foods, cutting edge program. Person in charge consented to inspection and reviewed inspections rights with person in charge: Ryan A. Routine inspection report was emailed to and Inspection Review Notice was handed to person in charge at establishment. Inspection report confirmed received. No County legal action will result from this inspection.


Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.