Black Mountain Coffee Shop
Permit ID: FD-61618
Permit Type: E & D
7211 E Ho Rd Suite 22 & 23 Carefree 85377
*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
07
No bare hand contact with RTE foods or approved alternate method properly followed
PRIORITY VIOLATION-3-301.11, P: Preventing Contamination from Hands; Bare Hand Contact with Ready to Eat Foods. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox---Handwashing. ...........On cook line, employee handled ready to eat food with bare hands. Employee discarded customer plated food. See embargo form. Employee washed hands and donned gloves to continue working with ready to eat foods. Discussed the importance of proper glove usage with employees.
(B) Except when washing fruits and vegetables as specified under §3-302.15 or as specified in ¶¶ (D) and (E) of this section, FOOD EMPLOYEES may not contact exposed, READY-TO-EAT FOOD with their bare hands and shall use suitable UTENSILS such as deli tissue, spatulas, tongs, single-use gloves, or dispensing EQUIPMENT.
Corrected At Time Of Inspection
14
Food-contact surfaces: cleaned & sanitized
Priority Foundation-4-601.11(A), Pf: Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. ...........In kitchen on storage shelf, slicer with accumulation of food debris on food and nonfood contact surfaces. Per employee, slicer was used several days ago and stored as clean. Instructed employee to re-wash, rinse, and sanitize slicer.
(A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be clean to sight and touch.
Corrected At Time Of Inspection
31
Proper cooling methods used; adequate equipment for temperature control
Core-3-501.15 (B), C: Cooling Methods; Cooling containers. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. ........In 3-door reach in cooler and bottom portion of prep table cooler, prepared pasta salad/ 70*F cooling in covered container. Pasta salad was partially uncovered to continue the cooling process. Discussed proper cooling methods with employees.
(B) When placed in cooling or cold holding EQUIPMENT, FOOD containers in which FOOD is being cooled shall be: (1) Arranged in the EQUIPMENT to provide maximum heat transfer through the container walls; and (2) Loosely covered, or uncovered if protected from overhead contamination, as specified under Subparagraph 3-305.11(A)(2), during the cooling period to facilitate heat transfer from the surface of the FOOD.
(A) Cooling shall be accomplished in accordance with the time and temperature criteria specified under § 3-501.14 by using one or more of the following methods based on the type of FOOD being cooled: (1) Placing the FOOD in shallow pans; (2) Separating the FOOD into smaller or thinner portions; (3)Using rapid cooling EQUIPMENT; (4) Stirring the FOOD in a container placed in an ice water bath; (5) Using containers that facilitate heat transfer; (6) Adding ice as an ingredient; or (7) Other effective methods.
Corrected At Time Of Inspection
Inspection Comments
This establishment is not participating in the award program at this time and had 1 Priority, 1 Priority Foundation and 1 Core Violations on this inspection. Discussion points with person in charge: handwashing, current illness policy, all handwashing sinks stocked with both hand drying towels/ handwashing soap, restrooms stocked with supplies, proper sanitizer for warewashing, and cleanliness of facility. Also discussed: wiping hands on dry wiping cloths throughout service. Person in charge consented to inspection and reviewed inspections rights with person in charge: Christina H. Routine inspection report was emailed to and Inspection Review Notice was handed to person in charge at establishment. Inspection report confirmed received. No County legal action will result from this inspection.
Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne
illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly
washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced
food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance
with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
