Master Taco
Permit ID: FD-78571
Permit Type: E & D
14291 W Grand Ave Suite D-110 Surprise 85374
*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
B
1
18
Proper cooling time & temperatures
PRIORITY VIOLATION-3-501.14, P: Cooling. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling.
Bucket of pinto beans stored in the walk in refrigerator measured with an internal temperature of 57 degrees F. Beans were prepared approximately 24 hours ago. The bucket had a lid on it, which prevented proper cooling. TCS food items must reach 41 degrees F within 6 hours. The beans were suggested for discard. Discussed cooling perimeters.
Corrected At Time Of Inspection
Inspection Comments
This establishment received a(n) B Grade and had 1 Priority, 0 Priority Foundation and 0 Core violations on this inspection. No County legal action will result from this inspection. Inspection rights discussed with Jose M Report emailed
Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne
illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly
washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced
food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance
with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
