Maricopa County, AZ

Black Rock Coffee Bar

Permit ID: FD-80374

Permit Type: E & D

13725 N Prasada Pkwy Surprise 85388

*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
0
Inspection Comments

First inspection for the black rock coffee surprise. Walk through with superintendent. The following items were discussed: 1). Sectional roll up door will not be installed for now. Electric is in place for future installation. If possible install fly fan / air curtain anyway so you are ready when the door is installed. 2). Mop sink will be flashed at the top and side to wall or caulked with a beveled bead away from the wall. 3). RO system is being installed in the back room. 4). Control joints in the floor will be filled. 5). If counters have a wooden substrate then paint panels first on the underside before installing and seal the wood. 6). Additional backflow valve meeting ASSE 1022 will need to be installed for the espresso machine. (Not in plan). 7). Hand wash sink will be installed in the back room. 8). Make sure the plumber brings the three compartment drain line along the wall to the floor sink and brace properly. Please see stipulation letters for plan review comments. Paint in the restrooms is washable. No need for change. All other backflow valve installations per plan. Construction is at 70%. No County legal action will result from this inspection. E-mailed to superintendent. Inspection rights included.


Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
Quick Search