Bartlett Lake - The Cove
Permit ID: FD-81845
Permit Type: E & D
20808 E Bartlett Dam Rd Rio Verde 85377
*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
Not Participating
1
20
Proper cold holding temperatures
PRIORITY VIOLATION-3-501.16(A)(2) and (B), P: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding. ........On cook line, in small prep table cooler, TCS foods (sliced meats, cooked vegetable, sliced cheese) with internal temperatures of 48*F-51*F. Per employee, TCS foods were removed from walk in cooler <4 hours. TCS foods (sliced meats, cooked vegetable, sliced cheese) were moved to walk in cooler to rapidly cool back down to the proper cold holding temperature. Discontinue use of prep table cooler until repaired and able to maintain proper temperature throughout the day, especially during busier times of service.
Maintain TCS (time/ temperature control for food safety) foods at a cold holding temperature of 41*F or less at all times.
Corrected At Time Of Inspection
21
Proper date marking & disposition
Priority Foundation-3-501.17, Pf: Ready-To-Eat Time/Temperature Control for Safety Food - Date Marking. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4125/Food-SafetyOperator-Resources. ...........In walk in cooler, cooked meats removed from freezer without proper pulled/ thaw dates noted. Instructed employee to provide pull dates on cooked meats. Discussed the importance of proper date marking on prepared TCS foods held in establishment >24 hours.
(A) Except when PACKAGING FOOD using a REDUCED OXYGEN PACKAGING method as specified under § 3-502.12, and except as specified in ¶¶ (E) and (F) of this section, refrigerated, READY-TOEAT, TIME/TEMPERATURE CONTROL FOR SAFETY FOOD prepared and held in a FOOD ESTABLISHMENT for more than 24 hours shall be clearly marked to indicate the date or day by which the FOOD shall be consumed on the PREMISES, sold, or discarded when held at a temperature of 5ºC (41ºF) or less for a maximum of 7 days. The day of preparation shall be counted as Day 1.
Corrected At Time Of Inspection
Inspection Comments
This establishment is not participating in the award program at this time and had 1 Priority, 1 Priority Foundation and 0 Core Violations on this inspection. In dining room, establishment has dog toys and metal dog bowls stored on ground. Instructed manager to remove all dog related products from food establishment. Routine inspection report was emailed to person in charge at establishment. Inspection report received by operator. No County legal action will result from this inspection.
Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne
illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly
washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced
food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance
with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
