Bird Talk Chicken
Permit ID: FD-82974
Permit Type: E & D
960 W University Dr Suite 116 Tempe 85281
*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
Not Participating
1
19
Proper hot holding temperatures
PRIORITY VIOLATION-3-501.16(A)(1), P: Time/Temperature Control for Safety Food, Hot Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4614/AMC-Toolbox---Hot-Holding.>>>Observed cooked pasta and nacho cheese with internal temperatures of 84-110*F per probe thermometer in the electric countertop food warmer in kitchen. Explained to person in charge (PIC) that all time/temperature control for safety (TCS) foods must be kept at 135*F or higher except during preparation, cooking, cooling, or when time is used as a control. PIC stated the TCS items had just been placed about 45 minutes before inspection started. PIC had employees reheat TCS items to 165*F for at least 15 seconds and place back in the food warmer.
Corrected At Time Of Inspection
Inspection Comments
This establishment is not participating in the award program at this time and had 1 Priority, 0 Priority Foundation and 0 Core Violations on this inspection. No County legal action will result from this inspection. Report emailed to PIC and confirmed received. *Reviewed date marking TCS items held over 24 hours and reading sauce labels before storing.
Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne
illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly
washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced
food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance
with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
