Maricopa County, AZ
*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
0
Inspection Comments

OC Re-Inspection - E&D Class 4 This inspection was conducted with the owner. A PDF copy of this inspection report was emailed to Marinar Y. at the time of this inspection. Correct the following prior to final permit approval and re-inspection scheduled for 12/07/2021; 1. The drain valves beneath far right compartment of the the 4-compartment sink is leaking. Repair the leak in this drain valve of the 4 Compartment sink. 2. A soda fountain has been added without adequate backflow protection. Use the disconnected RPZ backflow prevention device to provide backflow protection for the water supply line to the soda fountain carbonator. All piping and fittings on the downstream side of this device must be plastic or stainless steel, no copper or brass. Also, provide a funnel drain assembly that empties into a floor sink with a minimum 1 in. air-gap for this device. 3. Provide smooth, non-absorbent, easily cleanable covers above the walk-in refrigerator as discussed. There are currently acoustical ceiling tiles with the exposed acoustical surfaces installed above the walk-in refrigerator. 4. Repair the cold water valve on the hand sink in the back kitchen area. 5. Replace the missing floor grates on the floor sinks throughout the facility. No county legal action will result from this inspection.


Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
Quick Search