Maricopa County, AZ

Mac Daddy Wingz and Cheeze

Permit ID: FD-84418

Permit Type: E & D

3134 S Mill Ave Tempe 85282

*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
Not Participating
0
Violation
ID

Violation Description

Violation Comments

Correct By
08
Adequate hand washing facilities supplied & accessible
Priority Foundation-5-205.11, Pf: Using a Handwashing Sink-Operation and Maintenance. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox---Handwashing. - Observed handwashing sink in the back of house (BOH) with a bucket and chemical spray bottle stored inside. Observed chair placed in front of handwashing sink in the back of house. Person in charge (PIC) moved items out of handwashing sink and moved chair away from the sink at time of inspection. Hand washing facilities must be maintained in a condition that promotes handwashing and restricted for that use. Convenient accessibility of a handwashing facility encourages timely handwashing which provides a break in the chain of contamination from the hands of food employees to food or food-contact surfaces. Priority Foundation-6-301.12, Pf: Hand Drying Provision. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox---Handwashing. - Observed no paper towels at the handwashing sink in the front or in the back of house at time of inspection. Discussed with person in charge (PIC) that paper towels must be always available at handwashing sink. PIC restocked single-use paper towels. Discussed importance of providing hand drying provision to ensure proper hand washing with the PIC.
Corrected At Time Of Inspection
31
Proper cooling methods used; adequate equipment for temperature control
Core-3-501.15 (B), C: Cooling Methods; Cooling containers. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. - Observed mac and cheese with a temperature of 58 to 60*F stored in reach-in fridge in containers with lids and stacked on top of each other. Discussed proper cooling and cooling methods (shallow pans, ice baths, & lids off) with the PIC. All TCS foods held cooled from 135*F-70*F in 2 hours and from 70*F-41*F within 4 hours for a total of 6 hours to cool below 41*F.
Corrected At Time Of Inspection
46
Warewashing facilities: installed, maintained, & used; test strips
Priority Foundation-4-302.14, Pf: Sanitizing Solutions, Testing Devices. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. - Observed no chlorine test strips at time of inspection. Establishment utilized chlorine sanitizer for sanitizing food contact surfaces. Discussed importance of having chlorine test strips to determine concentration of sanitizer levels. Person in charge provided receipt for test strips at time of inspection.
Corrected At Time Of Inspection
Inspection Comments

This establishment is not participating in the award program at this time and had 1 Priority, 2 Priority Foundation violations on this inspection. Core-2-102.12(A), C: Certified Food Protection Manager Observed no Certified Food Manager (CFM) onsite at time of inspection. Person in charge was unable to produce a certified food protection manager certificate. A CFM is required to be on the premises during all hours of operations. Provide a CFM onsite by next routine inspection. Address the following items prior to next routine inspection: 1. Provide 1” air gap from the finished floor for the drainpipes from the prep sink and the 3-comp sink. Of Note: - Discussed with person in charge (PIC) about proper dishwashing procedures. - On July 1st, 2023, the Environmental Services Department started emailing permit card(s) and permit invoice(s) to permittees. We need a current and accurate email address on file to ensure you receive a copy of your permit card and invoice(s) upon renewal. If you are unsure whether your email address is accurate, you may: • Contact your inspector using the phone number or email on your last inspection report to review, or • Contact the Department using the email addresses below, o Envquickservicerestaurants@maricopa.gov (facilities such as fast-food) o Envfullservicerestaurants@maricopa.gov (facilities that are full-service restaurants) o Envretailgrocery@maricopa.gov (facilities like grocery stores or retail food markets) o Envspecialtyprograms@maricopa.gov (mobile food/special events/plan review) If you need to update your email address and/or other contact information, please submit an administrative change request form at the below website: https://www.maricopa.gov/FormCenter/Environmental-Services-16/Administrative-Change-Request-Form-181. Report e-mailed. No County legal action will result from this inspection.


Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
Quick Search