Bashas'
Permit ID: FD-84681
Permit Type: E & D
13940 W Meeker Blvd Sun City West 85375
*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
B
1
20
Proper cold holding temperatures
PRIORITY VIOLATION-3-501.16(A)(2) and (B), P: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.
Observed sandwich prep refrigerator measuring with ambient temperatures ranging between 45-48 degrees F (varies from top and bottom portion). TCS food items such as deli meats, cheeses, and condiments measured with internal temperatures ranging between 46-47 degrees F. These items were recommended for discard due to not having documentation to confirm last temperature check on this prep refrigerator. See embargo list for details. Refrigerator will not be used to hold TCS food items until in good repair and able to maintain internal food temperatures at or below 41 degrees F. Discussed cold holding and utilizing temperature check logs routinely.
Adequate alternative refrigeration available to operate safely.
Corrected At Time Of Inspection
Inspection Comments
This establishment received a(n) B Grade and had 1 Priority, 0 Priority Foundation and 0 Core violations on this inspection. No County legal action will result from this inspection. Report emailed
Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne
illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly
washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced
food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance
with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
