Maricopa County, AZ

Rusty Taco

Permit ID: FD-84698

Permit Type: E & D

205 E 7th St Tempe 85281

*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
0
Inspection Comments

Construction inspection for a Class 4 E&D 10+ permit was conducted by appointment with GC Andy. Inspection rights were delivered to Heath F. via email. The project is approximately 85% complete. The facility will be conducting IPM/AMC. The IPM plan for the facility is still being updated. The IPM will be finalized and reviewed on-site and is required for final permit approval. Please ensure the following items are addressed by the completion of the project: 1) Provide rigid piping for the flex drain lines at the 1022 backflow preventers and provide 1" minimum air gaps above the floor sink. The bar drink rails must also be rigid piped and air gapped to floor sinks. 2) Provide a splash guard to the left side of the handwash sink located at the bar. 3) Provide a semi-gloss finish to the soda fountain area and restroom walls. 4) Caulk-in all plumbing penetrations and escutcheon plates throughout the facility with silicone. At the final construction inspection, ensure hot water measuring 120' F minimum is provided to the plumbing system and all refrigerators are on and measuring at 41' F or below. Please contact the Department to schedule the final construction inspection (100% completion with Certificate of Occupancy) at 602.506.6824. MCESD inspection report was delivered via email. No County legal action will result from this inspection.


Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
Quick Search