Maricopa County, AZ

Food City

Permit ID: FD-84952

Permit Type: E & D

1845 N Scottsdale Rd Tempe 85281

*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
0

Violation Description

Violation Comments

Correct By
Other
Specific items for correction: 1) Install an ASSE 1013 reduced pressure backflow preventer upstream of the soda carbonator. Ensure no copper is downstream of the backflow. Certify and provide a test report. 2) Install an ASSE 1020 spill proof pressure vacuum breaker upstream of the spray hose located under the prep sink. Certify and provide a test report. 3) Install an ASSE 1022 dual check backflow preventer on the water supply line connected to the coffee system. 4) Refinish the rusted areas of the walk-in cooler. 5) Replace the metal cove base (3/8th inch minimum) at the walk-in cooler interior. 6) Repair the epoxy cove around the three compartment sink area. 7) Provide stoppers for all compartments at the three compartment sink. 8) The laminate countertops are not approved. Please replace with a solid surface material or wrap in stainless steel. 9) Provide a Type I ventilation hood for the rotisserie oven unit. The specification sheet provides no information indicating that it is a ventless unit.
Inspection Comments

OC inspection for Class 4 E&D 0-9 permit conducted with management by appointment. Inspection rights were delivered via email. The establishment was open and operating at time of inspection. This establishment has demonstrated sufficient compliance to proceed with the issuance of the permit. To complete the issuance of this permit and begin operation, the applicant must first submit payment of the permit fee to the Department’s Business Services Office. Per Chapter I, Regulation 4, of the Maricopa County Environmental Health Code, no person shall conduct an operation or an establishment for which a permit is required without holding the necessary and valid permit to do so. Payment with a credit card can be made in person, via on-line at ESD.MARICOPA.GOV, US Mail, or phone at 602-506-6824 Option 2. Payment can always be made in person at any regional office. We accept cash, check, money order, credit/debit. It is the responsibility of the permit holder/owner to notify MCESD if there are contact/ billing address changes. Please correct the items listed within 90 days or sooner provided supply chain issues are resolved. General items for correction: 1) Provide 1" minimum air gaps above the floor sinks for all indirect drain lines. 2) Caulk-in all escutcheon plates and plumbing penetrations throughout the facility with silicone. 3) Fill all wall holes, gaps, and cracks throughout the facility with silicone. 4) Replace the rusted and chipped floor sink grates and provide the missing dome grates within the floor sinks. 5) Trim all foam sealant at penetrations in the walk-in coolers flush and provide a smooth layer of silicone. 6) Re-caulk department sink fixtures. 7) Refinish the chipped, corroded, and pitted flooring in the walk-in coolers and epoxy flooring throughout the entire facility, as needed, to provide a smooth, durable, non-absorbent, and easily cleanable surface. 8) Re-wrap the condenser and condensate lines in the walk-in cooler with new black foam where damaged foam is present. 9) Conduct a cleaning of all floors, walls, and ceilings, as needed. Please be advised that the New Business Permit Application fee includes one initial inspection and one follow-up inspection. Additional fees will be assessed for any additional follow-up plan review inspections. MCESD inspection report was delivered via email. No County legal action will result from this inspection.


Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.