Maricopa County, AZ

Kangen Water & More

Permit ID: FD-85222

Permit Type: E & D

23425 N 39th Dr Suite 105 Glendale 85310

*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
0
Inspection Comments

OC Re-Inspection - E&D Class 2 This inspection was conducted with the manager on duty. A PDF copy of this inspection report was emailed to Vivian N. at the time of this inspection. Correct the following prior to final permit approval and re-inspection scheduled for 11/30/2021; 1. An alkalized water system has been installed on the three compartment sink. This system must be removed from the three compartment sink. It cannot be installed at the three compartment sink or dedicated hand sink. It can be installed in the bottle filler area. 2. Provide a minimum 1 in. air-gap between the end of the dipper well drain pipe and the flood rim of the floor sink that it drains into. 3. Finish installing washable ceiling tiles in the ice machine area. 4. Finish installing the vinyl cove base in the ice cream area and RO system area where missing. 5. Paint the remaining areas of bare drywall in the ice machine room with a minimum of semi-gloss paint. Do not paint any more FRP. R.S. 775 was present for this inspection. No county legal action will result from this inspection.


Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
Quick Search