Maricopa County, AZ

M Culinary Concepts

Permit ID: FD-85789

Permit Type: E & D

1600 N Priest Dr Tempe 85281

*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
0
Inspection Comments

OC re-inspection for a Class 3 10+ E&D was conducted with Ron T. by appointment. Inspection rights were delivered via email. The establishment is still approved to operate. Please address the following items prior to the OC re-inspection within 10 days: 1) Indirectly plumb the three compartment sink to the floor sink with a 1" minimum air gap. Cap the direct drain line. 2) Trim the drain lines at the three sink floor sink to provide 1" minimum air gaps. 3) Caulk-in all plumbing penetrations and escutcheon plates with silicone. 4) Replace the torn refrigerator door gaskets, as needed. 5) Replace the corroded faucets at the three compartment sink and back handwash sink. Please be advised that the New Business Permit Application fee includes one initial inspection and one follow-up inspection. Additional fees will be assessed for any additional follow-up plan review inspections. MCESD inspection report was delivered via email. No County legal action will result from this inspection.


Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
Quick Search