EASY STOP CORNER
Permit ID: FD-87108
Permit Type: Retail Food Establishment
6010 W Bethany Home Rd Glendale 85301
*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
A
0
49
Plumbing installed; proper backflow devices
Core-5-205.15 (B), C: System Maintained in Good Repair; Maintained. Observed plastic bucket lid being used to funnel water down the floor sink that the three compartment sink drains into. Ensure plumbing is properly located above the floor sink so that all waste water is collected and drained into the floor sink. Remove bucket lid.
Correct Prior To Next Routine Inspection
53
Physical facilities installed, maintained, & clean
Core-6-501.11, C: Repairing-Premises, Structures, Attachments, and Fixtures-Methods. Observed hand washing sink next to the three compartment sink detached from wall along with the FRP that was placed behind it. Repair FRP so it is secured to wall permanently and attach sink.
Correct Prior To Next Routine Inspection
Inspection Comments
This establishment received a(n) A Grade and had 0 Priority, 0 Priority Foundation and 2 Core violations on this inspection. No county legal action will result from this inspection. Emailed inspection report.
Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne
illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly
washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced
food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance
with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
