Maricopa County, AZ

Dunkin'

Permit ID: FD-88343

Permit Type: E & D

764 W Broadway Rd Tempe 85282

*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
0
Inspection Comments

Construction inspection for a Class 3 10+ E&D permit was conducted with superintendent Jacob G. by appointment. The project is approximately 95% complete. The permit is approved to stock and train. Please address the following items prior to the final construction inspection: 1) Provide ASSE 1055A internal air gaps to the mop sink chemical dispensers. 2) Provide ASSE 1022 dual check backflow preventers on the water supply lines for the coffee brewer and the beverage dispensing system. 3) Disable the manual switch on the air curtain installed at the drive-thru window. 4) Ensure the ventilation fans in the restrooms are operational. 5) Lift all water lines at the coffee stations so that there is a 6" minimum clearance from the floor. At the final construction inspection, ensure hot water measuring 120' F minimum is supplied to the plumbing system and all refrigerators are on and measuring at 41' F or below. Please contact the Department to schedule the final construction inspection (100% completion) at 602.506.6824. MCESD inspection report was delivered via email. No County legal action will result from this inspection.


Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
Quick Search