Ralph's Snack Bar
Permit ID: MF-15-0458
Permit Type: Mobile Food Type III
Route @1 Phoenix
*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
Not Participating
1
20
Proper cold holding temperatures
PRIORITY VIOLATION-3-501.16(A)(2) and (B), P: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.
---Observed TCS foods (raw beef/pork, potatoes) in fridge will fridge was off, at 49-55F. Embargoed food. Don't hold over food to the next day. Keep fridges at 41F or less.
Corrected At Time Of Inspection
MF
Mobile food regulation compliance
~MCEHC Chap. 8, Sec. 3, Reg. 9d; Food preparation in MF Type III is not simplified to reduce excessive steps where food may become contaminated.
---Observed holding food over in fridges. Removed all TCS foods from fridge after each day of service.
Corrected At Time Of Inspection
Inspection Comments
This establishment is not participating in the award program at this time and had 1 Priority, 0 Priority Foundation and 0 Core Violations on this inspection. No County legal action will result from this inspection. Inspection rights done with Jose G. Emailed report.
Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne
illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly
washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced
food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance
with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
