MVS
Permit ID: MF-16-0606
Permit Type: Mobile Food Type III
Route MVS #015 @4 Tempe
*PRIORITY VIOLATION is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
NA means not available. See detailed inspection reports for additional information.
NA means not available. See detailed inspection reports for additional information.
Grade
Priority Violation *
Cutting Edge Participant
Not Participating
0
31
Proper cooling methods used; adequate equipment for temperature control
Priority Foundation-4-301.11, Pf: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling.
--Observed prep style cooler ranging from 55df to 62df measured with max/min thermometer. Discussed with PIC that equipment for cold holding of TCS foods must have a capacity of 41df or below. PIC contacted repairman at time of inspection. Prep style cooler was repaired and reached a temperature of 40df with max/min thermometer.
Corrected At Time Of Inspection
Inspection Comments
This establishment is not participating in the award program at this time and had 0 Priority, 1 Priority Foundation and 0 Core Violations on this inspection. Inspection rights verbally acknowledged by Francisca G. Inspection report emailed. Inspection conducted at MVS commissary. No County legal action will result from this inspection.
Definitions
Priority violation is a major violation that directly contributes to increasing the risk of foodborne illness or injury.
e.g. - Food employees do not properly wash hands when required
Priority foundation violation is a minor violation that does not directly contribute to an increased risk of foodborne
illness but failure to correct this violation may lead to the occurrence of a priority violation.
e.g.- Hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly
washing hands when required)
Core violation is a minor violation that relates to general maintenance and sanitation.
e.g. -No sign reminding employees to wash hands
Verification Visits are inspections of establishments enrolled in the MCESD Cutting Edge Program, which requires an enhanced
food safety program and ongoing demonstration of active managerial control. Verification Visit inspections found in compliance
with Cutting Edge program requirements receive an “A” grade.
The matrix below has been used to grade food inspections under the voluntary grading system starting on October 14, 2011.
