Inspection Report

Business Name
The Cheesecake Factory

Business Address
3111 W CHANDLER BLVD CHANDLER AZ 85226

Permit Number
FD-05898

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
7/28/2025

Grade
Not Participating

Priority Violation
3

Inspection Status
Re-inspection required

Violations

Violation #: 8

Description: Hands Clean and Properly Washed

Comments:

PRIORITY VIOLATION-2-301.14 - Priority: When to Wash. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing.

Addl Notes: Corrective Action: Corrected at time of inspection. Two employees doing general tasks put on gloves to handle food without washing hands. Had employees wash hands. Discussed the importance of proper hand washing and when hand washing is required with the person-in-charge (PIC). Hands must be washed at any time contamination occurs and when changing tasks.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Corrective Action: Corrected at time of inspection. Cut lettuce, cut tomatoes, cooked vegetables, raw and cooked meats, cooked pastas and cheeses in the salad cooler drawers and the saute cooler drawers. at 47*F to 53*F internally. Manager stated the foods had been put into the units less than one hour before and were moved to the walk-ins to re-cool. Time as control was started for the TCS food until repaired. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Eggs not treated to destroy Salmonellae can be stored in equipment that maintains an ambient air temperature of 45°F or below.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Corrective Action: Correct prior to re-inspection 7/30/25. The salad cooler drawers and the saute cooler drawers on the cook line are holding TCS food 47-53*F and 47-51*F. Please repair to hold TCS food 41*F or below. Manager are using time as control with proper discard in the units until they are repaired. Cold holding equipment must have the capacity to maintain TCS foods at 41°F or below. Must repair cold holding equipment such that it maintains TCS foods at 41°F or below.

Violation #: 51

Description: Plumbing Installed; Proper Backflow Devices

Comments:

PRIORITY VIOLATION-5-203.14 - Priority: Backflow Prevention Device, When Required

Addl Notes: Corrective Action: Correct prior to re-inspection 8/4/25. No back flow prevention device on the waterline for the bakery espresso machine. Please provide. All water connected, non-carbonated beverage dispensers must have an approved backflow device such as an inline dual check meeting ASSE 1022 standards. No apparent back flow prevention on the pot filler hoses in the prep area. Provide an approved backflow device prior to re-inspection. All testable backflow devices must be certified.

Comments/Details

Predefined Comment: No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.