Inspection Report

Business Name
Thunderbird Suites
Business Address
7515 E BUTHERUS DR SCOTTSDALE AZ 85260
Permit Number
FD-05925
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
11/25/2025
Grade
Not Participating
Priority Violation
0
Inspection Status
Completed

Violations

Violation #: 16

Repeat Violation

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

4-602.11 (E) - Core: Equipment Food - Contact Surfaces and Utensils-Frequency; Non-TCS. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Observed built up brown residue on the interior surface of the soda gun nozzle at the bar. Equipment such as ice bins and beverage dispensing nozzles and enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment shall be cleaned at a frequency specified by the manufacturer, or absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. Discussed soda nozzle cleaning frequency. Please clean soda nozzles as frequently as necessary and prior to the next routine inspection. Corrective Action: Correct prior to next routine inspection. Repeat Violation: 2nd.

Violation #: 47

Repeat Violation

Description: Food and Non-Food-Contact Surfaces Cleanable, Properly Designed, Constructed and Used

Comments:

4-501.11 - Core: Good Repair and Proper Adjustment-Equipment Addl Notes: Observed low temperature dish machine not in use at time of inspection. After running and priming the dish machine multiple times, final rinse chlorine concentration measured at 0 PPM each time. Acceptable chlorine concentration shall measure between 50-100 PPM. Establishment will utilize the three-compartment sink to wash, rinse, and sanitize equipment, utensils, and food contact surfaces until the dish machine is repaired and maintains a chlorine concentration between 50-100 PPM. Corrective Action: Corrected at time of inspection. Repeat Violation: 2nd.

Violation #: 55

Repeat Violation

Description: Physical Facilities Installed, Maintained, and Clean

Comments:

6-501.11 - Core: Repairing -Premises, Structures, Attachments, and Fixtures-Methods Addl Notes: Observed a large hole in the wall near the mop sink faucet handles where plumbing is exposed. Predefined Comment: Physical facility must be maintained in good repair at all times. Repair physical facility prior to next routine inspection. Corrective Action: Correct prior to next routine inspection. Repeat Violation: 2nd.

Violation #: 56

Description: Adequate Ventilation and Lighting; Designated Areas Used

Comments:

6-202.11 - Core: Light Bulbs, Protective Shielding Addl Notes: Observed multiple unshielded lightbulbs in the main kitchen prep area. Light bulbs shall be shielded, coated, or shatter-resistant in area areas where there is exposed foods clean equipment, utensils, and linens; or unwrapped single- service and single use articles. Please repair or replace lightbulb shielding prior to the next routine inspection. Correct By: Correct Prior To Next Routine Inspection. Repeat Violation: 7th.

Comments/Details


Predefined Comment: No County legal action will result from this inspection.
Discussed potential change from class 4 E&D 10+ to class 3 E&D 10+, will evaluate prior to/ during the next routine inspection after the person in charge discusses with ownership. Establishment has discontinued dinner service and it is no clear at this time if dinner service will resume.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category Grade A Grade B Grade B Grade B Grade B Grade B Grade B Grade B Grade C Grade C Grade C Grade C Grade C Grade C Grade D Grade D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 more than 2 more than 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 more than 3 more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.