Inspection Report

Business Name
Someburros

Business Address
1335 E BASELINE RD GILBERT AZ 85233

Permit Number
FD-06141

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
4/22/2024

Grade
Not Participating

Priority Violation
3

Inspection Status
Completed

Violations

Violation #: 9

Description: No Bare Hand Contact with RTE Foods or a Pre-Approved Alternate Properly Followed

Comments:

PRIORITY VIOLATION-3-301.11, P: Preventing Contamination from Hands; Bare Hand Contact with Ready to Eat Foods. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox---Handwashing. - Observed employee holding cabbage to be cut with bare hand. According to manager, cabbage is used as a garnish for dishes and is not cooked before service. Ready-to-eat foods may not be touched with bare hands to prevent contamination. Employee washed hands and donned gloves at time of inspection.

Correct By: Corrected At Time Of Inspection

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

PRIORITY VIOLATION-4-501.114, P: Manual and Mechanical Warewashing Equipment, Chemical Sanitization- Temperature, pH, Concentration and Hardness. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. - Observed dishwasher dispensing 0 ppm of chlorine sanitizer in final rinse. All chlorine dishwashers must dispense 50-100 ppm of chlorine sanitizer to ensure proper sanitization of food contact surfaces. Sanitizer container was empty and was changed at time of inspection. 50 ppm of chlorine in final rinse was established at time of inspection.

Correct By: Corrected At Time Of Inspection

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B), P: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding. - Observed shredded lettuce, diced tomato, guacamole with tomatoes, jalapeno cream cheese, and sour cream at the top of the reach-in table with internal temperatures ranging from 49*F-56*F when measured with a probe thermometer. All TCS (time and temperature controlled for safety) foods must maintain internal temperatures of 41*F and below. All food was discarded at time of inspection (see embargo).

Correct By: Corrected At Time Of Inspection

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

Priority Foundation-4-301.11, Pf: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. - Observed bottom of reach-in table on the cook line with an ambient temperature of 60.8*F when measured with a min/max thermometer. Refrigerator on the other side of the cook line was observed to have an ambient temperature of 48.2*F when measured with a min/max thermometer. All cold holding units must maintain ambient temperatures of 41*F and below. According to manager, all food had been placed in units less than two hours prior. All TCS foods were moved to walk-in at time of inspection. A re-inspection for cold holding units will be conducted by 5/2/24.

Correct By: Correct Prior To Reinspection

Violation #: 48

Description: Warewashing Facilities, Installed, Maintained, Used, Test Strips

Comments:

Priority Foundation-4-302.14, Pf: Sanitizing Solutions, Testing Devices. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. - Observed quaternary ammonium sanitizer being used in three compartment sink with no test strips available. Test strips must be available at all times to ensure proper concentrations are being used to sanitize food contact surfaces. Please obtain quaternary ammonium test strips by reinspection on 5/2/24.

Correct By: Correct Prior To Reinspection

Comments/Details

This establishment is not participating in the award program at this time and had 3 Priority, 2 Priority Foundation violations on this inspection.

Inspection report delivered via email.

No County legal action will result from this inspection.

On July 1st, 2023, the Environmental Services Department started emailing permit card(s) and permit invoice(s) to permittees. We need a current and accurate email address on file to ensure you receive a copy of your permit card and invoice(s) upon renewal.
If you are unsure whether your email address is accurate, you may:
• Contact your inspector using the phone number or email on your last inspection report to review, or
• Contact the Department using the email addresses below,
o Envquickservicerestaurants@maricopa.gov (facilities such as fast-food)
o Envfullservicerestaurants@maricopa.gov (facilities that are full-service restaurants)
o Envretailgrocery@maricopa.gov (facilities like grocery stores or retail food markets)
o Envspecialtyprograms@maricopa.gov (mobile food/special events/plan review)
If you need to update your email address and/or other contact information, please submit an administrative change request form at the below website
https://www.maricopa.gov/FormCenter/Environmental-Services-16/Administrative-Change-Request-Form-181.

Award: Not Participating,Food Manager Licenses: 1,Signer: Miranda Cavazos

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.