Inspection Report

Business Name
Village At Pinnacle Peak

Business Address
8711 E PINNACLE PEAK RD SCOTTSDALE AZ 85255

Permit Number
FD-06947

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
10/13/2025

Grade
Not Participating

Priority Violation
3

Inspection Status
Completed

Violations

Violation #: 8

Description: Hands Clean and Properly Washed

Comments:

PRIORITY VIOLATION-2-301.12 - Priority: Cleaning Procedure. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing.

Addl Notes: At in use warewashing area, employee washed hands at handwashing sink with soap then dried hands on dirty dish towel to begin handling clean dishware. Instructed employee to re-wash hands with soap and dry with provided disposable paper towels at handwashing sink. Discussed the importance of proper hand washing procedures with the person-in-charge (PIC). Proper handwashing procedure is to rinse hands with warm water, scrub with soap for 10-15 seconds, rinse with warm water, dry with approved drying provision, and turn off in a manner to prevent re-contamination of hands. Entire process should take approximately 20 seconds for full and proper handwashing to prevent spread of pathogens and contamination. Corrective Action: Corrected at time of inspection.

Violation #: 21

Description: Proper Hot Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(1) - Priority: Time/Temperature Control for Safety Food, Hot Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4614/AMC-Toolbox---Hot-Holding.

Addl Notes: On cook line, in hot holding unit next to grill top, sausage links and sausage patties with internal temperatures of 110*F-125*F. Per employee, sausages were prepared within normal time parameters. Employee reheated links and patties on cook top to 165*F and placed back into hot holding unit. Maintain TCS (time/ temperature control for food safety) foods at a hot holding temperature of 135*F or higher at all times. Corrective Action: Corrected at time of inspection.

Violation #: 22

Repeat Violation

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Second Consecutive Violation On cook line, in prep table cooler in front of grill top, TCS foods (shredded cheeses, sliced deli meats, shell eggs, liquid eggs, cut tomatoes) with internal temperatures of 49*F-78*F and ambient temperature of cooler at 41*F. At front service counter, in reach in cooler, TCS foods (sour cream, whipping cream, salsa) with internal temperatures of 50*F and ambient temperature of cooler at 50*F. All temperatures were taken with inspector probe thermometer. Per employees, TCS foods were placed in two coolers within normal time parameters. Employee adjusted ambient temperatures of prep table coolers to 36*F and internal temperatures of TCS foods dropped to <41*F within 45 minutes. Discussed more frequent monitoring of ambient temperatures of TCS foods in prep table coolers. Maintain TCS (time/ temperature control for food safety) foods at a cold holding temperature of 41*F or less at all times. Corrective Action: Corrected at time of inspection.

Comments/Details

No County legal action will result from this inspection.
Ensure all employees working with food obtain food worker certification from ANSI certified online site.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.