Inspection Report

Business Name
Mr Leno Mexican Food LLC
Business Address
8430 W MCDOWELL RD PHOENIX AZ 85037
Permit Number
FD-10048
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
4/24/2025
Grade
B
Priority Violation
0
Inspection Status
Completed

Violations

Violation #: 23

Description: Proper Date Marking and Disposition

Comments:

3-501.17 - Priority Foundation: Ready-To-Eat Time/Temperature Control for Safety Food, Date Marking. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4125/Food-SafetyOperator-Resources. Addl Notes: Observed containers of Tres leches cake that were cold holding in a refrigerated reach-in unit. The containers of cake did not have any visible date markings on them. In discussion with the person in charge, the cakes had been produced 3 days prior to the inspection. Person in charge added date marking to the cake slice containers to accurately track the time and temperature controlled for safety food. RTE/TCS foods requiring date marking must be date marked within 24 hours and sold or discarded after 7 days (including the day it was made as day 1). Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

3-501.15 (A) - Priority Foundation: Cooling Methods. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed a container of cooked pinto beans sitting on the counter. The internal temperature of the container of beans as measured using a probe thermometer was at 103°F. According to the person in charge, the beans had been cooked 15 minutes prior to the temperature assessment. The cooling beans were relocated to the walk-in cooler to complete the cooling process. Discussed with person in charge to regularly monitor food temperatures. Once the food temperature drops to 135°, that is when the cooling process begins, and cooling foods should be placed into the walk-in cooler. Food should be kept uncovered, less than 4 inches deep and placed up high in the walk-in cooler to cool. Foods must cool from 135°F to 70° within the first 2 hours and then from 70°F to 41° within the next 4 hours for a total cooling period of no more than 6 hours. Corrective Action: Corrected at time of inspection.

Violation #: 43

Description: In-Use Utensils; Properly Stored

Comments:

3-304.12 - Core: In-Use Utensils, Between-Use Storage Addl Notes: Observed two kitchen knives that were stored between the prep unit and the adjacent table. Person in charge removed the knives from that area and returned them to the 3-compartment sink to be washed, rinsed and sanitized. Discussed with person in charge that in-use utensils must be stored in a clean, dry location; in running water; or in hot water above 135°F. If utensils are stored in food, the handles must be stored above the surface of the food. All in-use utensils were properly stored at time of inspection. Corrective Action: Corrected at time of inspection.

Comments/Details


No County legal action will result from this inspection.
Discussed food container integrity and floor tiles in the main cooking area. Si tiene alguna pregunta sobre este reporte de inspección, o le gustaría repasar lo con alguien en español, favor de llamar a nuestros enlaces hispanos al (602) 463-3132 o (602) 526-6123. If you have any questions regarding this inspection report or would like to review it with someone in Spanish, please contact our language liaisons at (602) 463-3132 or (602) 526-6123.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
A B B B B B B B C C C C C C D D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 2 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 3 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.