Inspection Report
Hampton Inn & Suites
6630 N 95TH AVE GLENDALE AZ 85305
FD-12180
Food Establishment - Eating & Drinking
Food Routine Inspection
8/7/2024
B
1
Re-inspection required
Violations
Violation #: 22
Description: Proper Cold Holding Temperatures
Comments:
PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.
Addl Notes: Observed milk gallons inside of a reach-in unit with internal temperatures as measured using a probe thermometer of 49°-50° F. The ambient air temperature as measured using a min-max thermometer recorded an ambient temperature of around 50° F inside of the reach-in unit. Milk was moved to another reach-in unit to rapidly chill to 41° F. Per the person in charge, it appears that the unit may be in need of service. Person in charge had a technician come out and service the unit. In the meantime, no TCS foods are being kept in the reach-in unit until it is adequately repaired. The establishment has sufficient capacity to maintain normal operations. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Eggs not treated to destroy Salmonellae can be stored in equipment that maintains an ambient air temperature of 45°F or below. Corrective Action: Corrected at time of inspection.
Violation #: 48
Description: Warewashing Facilities, Installed, Maintained, Used, Test Strips
Comments:
4-302.14 - Priority Foundation: Sanitizing Solutions, Testing Devices. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Observed no thermal test strips or min-max thermometer that can record maximum temperatures for the hot water sanitizing dish machine. Please ensure that you have at least one of either the min-max thermometer or the high-temperature test strips to verify that the dish machine is sanitizing at the correct sanitizing temperature of at least 160 F°. Corrective Action: Correct prior to re-inspection.
Comments/Details
No County legal action will result from this inspection.
"A" for Food Safety
Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.
How does it work?
The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.
How can I determine the grade?
The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.
Definitions
- Priority Violation
- Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
- Priority Foundation Violation
- Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
- Core Violation
- Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
- Cutting Edge Program
- All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
| Violation Category | Grade A | Grade B | Grade B | Grade B | Grade B | Grade B | Grade B | Grade B | Grade C | Grade C | Grade C | Grade C | Grade C | Grade C | Grade D | Grade D |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Priority | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | 2 | 2 | 2 | more than 2 | more than 3 |
| Priority Foundation | 0 | 1 | 2 | 3 | 4 | 0 | 1 | 2 | 5 | 3 | 4 | 0 | 1 | 2 | more than 3 | more than 0 |
Any legal action for a pattern of non-compliance or permit suspension results in a D.