Inspection Report

Business Name
Banner
Business Address
10401 W THUNDERBIRD BLVD SUN CITY AZ 85351
Permit Number
FD-13698
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
CI Food Routine Inspection
Inspection Date
2/12/2025
Grade
A
Priority Violation
0
Inspection Status
Completed

Violations

Violation #: 47

Description: Food and Non-Food-Contact Surfaces Cleanable, Properly Designed, Constructed and Used

Comments:

4-402.11 - Core: Fixed Equipment, Spacing or Sealing-Installation Addl Notes: Countertop at action station needs re-caulked against wall. fixed equipment shall be sealed to wall to ensure proper cleaning. PIC stated that they will submit a work order. Corrective Action: Correct prior to next routine inspection.

4-101.11 (B-E) - Core: Characteristics- Multiuse; Durable, Nonabsorbent, Smooth, Easily Cleanable Addl Notes: Countertop at hot line and pizza station is uneven and has multiple cracks. Correct prior to next routine inspection. All food-contact surfaces must be smooth, non-absorbent, and easily cleanable.

Violation #: 49

Description: Non-Food-Contact Surfaces Clean

Comments:

4-602.13 - Core: Nonfood Contact Surfaces Addl Notes: Areas around soda nozzles and where ice dispenses at soda machines observed with organic matter build-up. Advised PIC to clean these areas at a frequency necessary to preclude accumulation of residue. Corrective Action: Correct prior to next routine inspection.

Comments/Details

Kitchen was undergoing a minor remodel for one of their walk-in coolers. The unit used to be a walk-in cooler/walk-in freezer. It is now being turned into one big freezer. PIC stated they may also raise the ceiling up 6inches. Project manager was informed that a minor remodel permit must be submitted within 5 business days.
Predefined Comment: No County legal action will result from this inspection.
**Discussed proper food storage and importance of protecting food from potential contamination from premise**

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category Grade A Grade B Grade B Grade B Grade B Grade B Grade B Grade B Grade C Grade C Grade C Grade C Grade C Grade C Grade D Grade D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 more than 2 more than 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 more than 3 more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.