Inspection Report

Business Name
Beatitudes Campus

Business Address
1616 W GLENDALE AVE PHOENIX AZ 85021

Permit Number
FD-13958

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
CI Food Routine Inspection

Inspection Date
6/23/2026

Grade
B

Priority Violation
1

Inspection Status
Completed

Cutting Edge Cutting Edge Participant

Violations

Violation #: 10

Description: Adequate Handwashing Sinks, Properly Supplied and Accessible

Comments:

5-205.11 - Priority Foundation: Using a Handwashing Sink-Operation and Maintenance. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing. Addl Notes: Observed dried food debris inside of multiple designated hand sinks throughout the kitchen at time of inspection. Discussed dumping prohibitions at designated hand sinks with PIC. Handwash sinks must be supplied with hot water of at least 100°F, soap and an approved hand drying provision at all times. Facilities must be maintained in a condition that promotes handwashing. PIC will ensure establishment discontinues use of handwash sink for all activities that are not for handwashing. Corrective Action: Corrected at time of inspection.

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

4-501.112 - Priority Foundation: Mechanical Warewashing Equipment, Hot Water Sanitization Temperatures. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Observed high-temp dish machine operating at 156.3'F after 3 priming runs of the unit. Per PIC, they will submit a work order to have the unit serviced and will discontinue use of the dish machine until repairs are made, such that surface sanitizing temperatures reach a minimum of 160'F. When food-contact surfaces are being sanitized with hot water in a dish machine, the surface temperature must reach at least 160°F as measured by an irreversible registering temperature measuring device to destroy pathogens that may remain on such surfaces after cleaning. PIC relocated all food-contact surfaces to warewashing area to be washed, rinsed, and sanitized at the time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed cut tomatoes (47'F), breakfast sausage (49'F), cubed deli ham (46'F), and sliced deli turkey (48'F) stored in cold holding drawers directly beneath the flat-top at time of inspection. Cold holding drawers beneath the flat-top were measured twice via Min/max thermometer to be operating at 21.1'F and then again at 46'F at time of inspection. Per PIC, the food inside was placed inside from the walk-in cooler during breakfast service, about 1 hour prior to inspection. Discussed servicing the unit and discontinuing use until such repairs are made ensures all food held within is maintained at or below 41'F. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Eggs not treated to destroy Salmonellae can be stored in equipment that maintains an ambient air temperature of 45°F or below. All TCS foods improperly cold held were relocated to alternative functioning refrigeration unit to rapidly cool to 41°F at time of inspection. Corrective Action: Corrected at time of inspection.

Comments/Details

No County legal action will result from this inspection.
This establishment is enrolled in the Maricopa County Environmental Services Cutting Edge Program and is on the Cutting Edge of food safety.
Of Note: Discussed date-marking policy, paper towel availability, and cleaning frequency of food-contact surfaces with PIC.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.