Inspection Report

Business Name
Tan Phat Market
Business Address
1702 W CAMELBACK RD PHOENIX AZ 85015
Permit Number
FD-14377
Permit Type
Food Establishment - Meat Market
Inspection Purpose
Food Routine Inspection
Inspection Date
6/24/2026
Grade
Not Participating
Priority Violation
1
Inspection Status
Re-inspection required

Violations

Violation #: 10

Description: Adequate Handwashing Sinks, Properly Supplied and Accessible

Comments:

5-202.12 (A) - Priority Foundation: Handwashing Sinks, Installation. Proper temperature, Mixing Faucet. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing. Addl Notes: Observed handwashing sink to the left side of the 3-compartment sink with hot water lever not working. Water temperature: 80°F. Informed person in charge (PIC) that handwash sinks must be supplied with hot water of at least 100°F. PIC stated understanding and contacted a plumber. Corrective Action: Correct prior to re-inspection within 10 days (07/02/26).

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed various types of raw fish in the walk-in cooler by the 3-compartment sink with internal temperature in the range of 58-62°F. Ambient temperature measure via min/max thermometer is 64°F. Informed person in charge (PIC) that except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. PIC stated the walk-in cooler was working in the morning (less than 4 hours ago). All TCS foods improperly cold held were relocated to the other walk-in cooler to rapidly cool to 41°F at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed walk-in cooler by the 3-compartment sink with ambient temperature 64°F measured via min/max thermometer. Incorporated digital thermometer shows a temperature of 64°F. Informed person in charge (PIC) that cold holding equipment must have the capacity to maintain TCS foods at 41°F or below. Must repair cold holding equipment such that it maintains TCS foods at 41°F or below. Corrective Action: Correct prior to re-inspection within 10 days (07/02/26).

Comments/Details


No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category Grade A Grade B Grade B Grade B Grade B Grade B Grade B Grade B Grade C Grade C Grade C Grade C Grade C Grade C Grade D Grade D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 more than 2 more than 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 more than 3 more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.