Inspection Report

Business Name
Local Bistro

Business Address
20581 N HAYDEN RD SCOTTSDALE AZ 85255

Permit Number
FD-17663

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
12/2/2025

Grade
Not Participating

Priority Violation
1

Inspection Status
Completed

Violations

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

4-601.11(A) - Priority Foundation: Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: In small table prep area, slicer and pasta maker with accumulation of food debris on food and nonfood contact surfaces. Per employees, slicer and pasta maker were stored as clean. Instructed employees to rewash, rinse, and sanitizer slicer and past maker to ensure all food and food contact surfaces of free of food debris and residues. All food-contact surfaces must be cleaned to sight and touch. Corrective Action: Corrected at time of inspection.

Violation #: 23

Description: Proper Date Marking and Disposition

Comments:

PRIORITY VIOLATION-3-501.18 - Priority: Ready-To-Eat Time/Temperature Control for Safety Food, Disposition. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4125/Food-SafetyOperator-Resources.

Addl Notes: In walk in cooler, container of cooked onion soup past 7-day discard date (11-25). Employee discarded cooked onion soup. See embargo form. RTE/TCS foods requiring date marking must be date marked within 24 hours and sold or discarded after 7 days (including the day it was made as day 1). Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

3-501.15 (A) - Priority Foundation: Cooling Methods. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: In walk in cooler, cooked onion soup/ 55*F-65*F, prepared and cooling in covered containers >6 inches deep. Per employee, soup was prepared within normal time parameters. Employee moved two containers of onion soup to freezer and added ice wants to continue the cooling process. (A) Cooling shall be accomplished in accordance with the time and temperature criteria specified under § 3-501.14 by using one or more of the following methods based on the type of FOOD being cooled: (1) Placing the FOOD in shallow pans; (2) Separating the FOOD into smaller or thinner portions; (3)Using rapid cooling EQUIPMENT; (4) Stirring the FOOD in a container placed in an ice water bath; (5) Using containers that facilitate heat transfer; (6) Adding ice as an ingredient; or (7) Other effective methods. (B) When placed in cooling or cold holding EQUIPMENT, FOOD containers in which FOOD is being cooled shall be: (1) Arranged in the EQUIPMENT to provide maximum heat transfer through the container walls; and (2) Loosely covered, or uncovered if protected from overhead contamination, as specified under Subparagraph 3-305.11(A)(2), during the cooling period to facilitate heat transfer from the surface of the FOOD. Corrective Action: Corrected at time of inspection.

Comments/Details

No County legal action will result from this inspection.
Reviewed with employees: broken tiles, cutting boards.

Ensure all employees working with food obtain food worker certification
from ANSI certified online site.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.