Inspection Report

Business Name
Chen Chinese Bistro

Business Address
990 E RIGGS RD CHANDLER AZ 85249

Permit Number
FD-18424

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
8/10/2026

Grade
Not Participating

Priority Violation
2

Inspection Status
Re-inspection required

Violations

Violation #: 16

Repeat Violation

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

PRIORITY VIOLATION-4-501.114 (A-E) - Priority: Manual and Mechanical Warewashing Equipment, Chemical Sanitization- Temperature, pH, Concentration and Hardness. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces.

Addl Notes: Observed chlorine sanitizer at ware wash machine in use measured less than 10 ppm at time of inspection. Sanitizer bucket was empty. Manager changed with a new sanitizer bucket and chlorine sanitizer was measured between 50 ppm to 100 ppm at time of inspection. Corrective Action: Corrected at time of inspection.

4-601.11(A) - Priority Foundation: Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Observed the piercing blade of the can opener stored in holder with organic debris. Manager placed the can opener in dishwashing area for cleaning and sanitizing at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 22

Repeat Violation

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed cooked noodle, cooked shrimp, raw cut cabbage, raw bean sprouts, and raw pooled eggs in left side prep cooler with internal temperature between 50*F to 55*F, also observed fried chicken, cooked dumplings and cooked eggrolls in one door refrigerator with internal temperature between 50*F to 55*F. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Eggs not treated to destroy Salmonellae can be stored in equipment that maintains an ambient air temperature of 45°F or below. Manager stated the above food were moved from walk-in cooler less than 2 hours prior to inspection. Manager moved above food back to walk-in cooler for fast cooling at time of inspection. Corrective Action: Corrected at time of inspection. This is a repeat violation.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed ambient temperatures of left side prep cooler and one-door refrigerator were measured at 54*F and 48.8*F using MinMax thermometer. TCS food items cold holding in them were measured between 50*F to 55*F. Please do not use these two units until repaired and re-inspected before 08/20/2026. Corrective Action: Correct prior to re-inspection.

Comments/Details

No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.