Inspection Report
Honey & Sol
25609 N DANNY LN RIO VERDE AZ 85263
FD-23-01442
Food Establishment - Eating & Drinking
Food Routine Inspection
2/28/2024
Not Participating
1
Completed
Violations
Violation #: 16
Description: Food-Contact Surfaces: Cleaned and Sanitized
Comments:
PRIORITY VIOLATION-4-501.114, P: Manual and Mechanical Warewashing Equipment, Chemical Sanitization- Temperature, pH, Concentration and Hardness. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces.... Observed in use high temperature sanitizing dish washing machine at a final rinse temperature of 157*F measured by cooper min max thermometer. Person in charge informed when using high temperature sanitizing ware washing machine the minimum temperature shall be at minimum 165*F. Person in charge moved all dish washing and sanitizing to three compartment sink at time of inspection.
Correct By: Corrected At Time Of Inspection
Violation #: 48
Description: Warewashing Facilities, Installed, Maintained, Used, Test Strips
Comments:
Priority Foundation-4-302.14, Pf: Sanitizing Solutions, Testing Devices. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces.... Establishment did not have Quat test strips to measure concentration of sanitizer solution in 3 compartment sink at time of inspection. Person in charge informed they shall have test strips to measure concentration of sanitizer solution at all times.
Correct By: Correct Prior To Reinspection
Comments/Details
Re-inspection Scheduled for 3/6/2023 for violation #46
1) Provide test reports for all testable backflow preventers (RPZs at combi oven, RPZ at glass rinser). Backflow must be repaired if tests fail. Backflow must be tested yearly. Maintain certificates on site for verification.
2) Switch out flexible drain lines (espresso machines, glass rinser) for hard pipe drain line as much as possible.
3) Provide minimum 1" air gaps for all drain lines in front service area (espresso machines, ice bins, glass rinser, sinks) above flood rim of bottom cabinet.
4) Finish completing Other Effective Means (OEM) of Barrier Protection Requirements, including adding fly bait stations etc. and creating a pest sighting log and employee training statement. Do not use continuous openings until OEM is approved.
No County legal action will result from this inspection.
Report emailed at time of inspection
On July 1st, 2023, the Environmental Services Department started emailing permit card(s) and permit invoice(s) to permittees. We need a current and accurate email address on file to ensure you receive a copy of your permit card and invoice(s) upon renewal.
If you are unsure whether your email address is accurate, you may:
• Contact your inspector using the phone number or email on your last inspection report to review, or
• Contact the Department using the email addresses below,
o Envquickservicerestaurants@maricopa.gov (facilities such as fast-food)
o Envfullservicerestaurants@maricopa.gov (facilities that are full-service restaurants)
o Envretailgrocery@maricopa.gov (facilities like grocery stores or retail food markets)
o Envspecialtyprograms@maricopa.gov (mobile food/special events/plan review)
If you need to update your email address and/or other contact information, please submit an administrative change request form at the below website
https://www.maricopa.gov/FormCenter/Environmental-Services-16/Administrative-Change-Request-Form-181.
Award: Not Participating,Signer: Jason Talsky
"A" for Food Safety
Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.
How does it work?
The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.
How can I determine the grade?
The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.
Definitions
- Priority Violation
- Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
- Priority Foundation Violation
- Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
- Core Violation
- Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
- Cutting Edge Program
- All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
| Violation Category | Grade A | Grade B | Grade B | Grade B | Grade B | Grade B | Grade B | Grade B | Grade C | Grade C | Grade C | Grade C | Grade C | Grade C | Grade D | Grade D |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Priority | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | 2 | 2 | 2 | more than 2 | more than 3 |
| Priority Foundation | 0 | 1 | 2 | 3 | 4 | 0 | 1 | 2 | 5 | 3 | 4 | 0 | 1 | 2 | more than 3 | more than 0 |
Any legal action for a pattern of non-compliance or permit suspension results in a D.