Inspection Report

Business Name
Nature's Purpose
Business Address
1522 W TODD DR TEMPE AZ 85283
Permit Number
FD-23-01911
Permit Type
Food Establishment - Food Production
Inspection Purpose
Food Routine Inspection
Inspection Date
10/29/2025
Grade
A
Priority Violation
0
Inspection Status
Completed

Violations

Violation #: 47

Description: Food and Non-Food-Contact Surfaces Cleanable, Properly Designed, Constructed and Used

Comments:

4-501.12 - Core: Cutting Surfaces Addl Notes: Observed deep groove cuts and stains on several cutting boards stored away as clean. All food-contact surfaces must be smooth, non-absorbent, and easily cleanable. All equipment must be maintained in good repair at all times. Repair all equipment to a state of good repair prior to next routine inspection. Corrective Action: Correct prior to next routine inspection.

Violation #: 52

Description: Sewage and Waste Water Properly Disposed

Comments:

5-403.12 - Core: Other Liquid Wastes and Rainwater Addl Notes: Observed frozen liquid buildup into icicles in the freezer walk-in. Observed frozen bananas stored directly below and loosely covered with plastic wrap. Observed bananas contaminated with frozen liquid. Embargoed the bananas and PIC discarded at time of inspection. Fix/repair/replace the cause of the liquid buildup by next routine inspection. Corrective Action: Correct prior to next routine inspection.

Comments/Details


No County legal action will result from this inspection.
Of Note: Discussed with PIC A) 1) Name of Product; 2) Processor Name; 3) Processor Address or Phone Number; 4) Ingredients;
5) Approximate Weight; 6) In English. B) Cooling ambiently can occur until 135*F and then other cooling methods shall be utilized. C) Medicines/first aid shall be stored in a location that prevents contamination of equipment, foods, food contact surfaces, single use items and clean linens.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category Grade A Grade B Grade B Grade B Grade B Grade B Grade B Grade B Grade C Grade C Grade C Grade C Grade C Grade C Grade D Grade D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 more than 2 more than 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 more than 3 more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.