Inspection Report
Jimmy John's - #1554
15425 N SCOTTSDALE RD SCOTTSDALE AZ 85254
FD-23-02165
Food Establishment - Eating & Drinking
Food Routine Inspection
12/8/2023
Not Participating
1
Re-Inspection Required
Violations
Violation #: 10
Repeat Violation
Description: Adequate Handwashing Sinks, Properly Supplied and Accessible
Comments:
Priority Foundation-5-203.11, Pf: Handwashing Sinks-Numbers and Capacities. For a permanent fix
to this violation, check out these simple tools in our Active Managerial Control Toolbox, made
especially for you. https://www.maricopa.gov/4573/AMC-Toolbox---Handwashing.
1) Install a hand sink in back room with ice machine. Hand sink must have hot and cold water and
drain to the sewer. Do not run drain line for hand sink to mop sink; use the floor sink or a
direct line into the wall. Handwashing sinks must be centrally located, visible, and directly
accessible within 25-feet of all food/beverage preparation, food/beverage dispensing and
warewashing, wait stations, and similar workstation areas. Barriers must not physically and/or
operationally obstruct the hand washing facility. Metal splashguards must be installed between the
hand sink and food/ beverage/ utensil related areas within 24-inches of the hand sink. (FC §5-
203.11, MCEHC §8.1.8e (1))
Correct By: Correct Prior To Reinspection,Repeat Violations: 2nd
Violation #: 51
Repeat Violation
Description: Plumbing Installed; Proper Backflow Devices
Comments:
PRIORITY VIOLATION-5-205.15 (A), P: System Maintained in Good Repair; According to Law
2) Provide a dedicated water line to chemical dispenser at mop sink; it cannot be connected to mop
sink faucet.
3) Have chemical company provide true unobstructed 1"air gaps for all chemical dispensers; flex
gaps are not
approved.
4) Have RPZ backflow for soda system tested (located at bag-in-box). Maintain certificate on site
for inspection.
Backflow must be tested yearly.
5) Install an in-line dual check (ASSE 1022) on water line to tea brewer.
6) Install an ASSE 1022 on water line to ice machine.
7) Elevate/secure drain lines under ice machine so they keep a minimum 1"air gap at floor sink.
Correct By: Correct Prior To Reinspection,Repeat Violations: 2nd
Violation #: 55
Repeat Violation
Description: Physical Facilities Installed, Maintained, and Clean
Comments:
Core-6-101.11, C: Surface Characteristics-Indoor Areas
8) Provide brighter light throughout walk-in cooler. Either relocate existing light fixture, or
provide an additional light
fixture centrally in the ceiling. Also provide a brighter bulb.
9) Repair rust damage inside walk-in cooler. Deep clean first and use a rust blocking paint
such as rustoluem. Also
refinish rusted leg of 3-compartment sink.
10) Flash off top of walk-in cooler to the ceiling - replace broken piece used for flashing. Do
not use the top of the
walk-in cooler for storage.
11) Replace missing ceiling tiles at water heater.
12) Seal gaps at electrical outlets in front service area (back wall), and all small holes in
walls with caulk or silicone.
13) Repair wall damage at light fixtures in men?s restroom.
14) Replace clean out cover in men's restroom.
15) Provide cove base in both restrooms. Tooling in a 3/8"cove with siliconized grout or
similar is acceptable.
16) Replace all floor and base tiles where missing or loose throughout establishment, namely at
corner near back
room.
17) Provide weather stripping at entrance, so that no light/gap is visible around door.
Correct By: Correct Prior To Reinspection,Repeat Violations: 2nd
Comments/Details
Correct the noted items within 30 days.
This establishment is not participating in the award program at this time and had 1 Priority, 1 Priority Foundation violations on this inspection.
No County legal action will result from this inspection. If violations are not corrected within 30 days, legal action may result.
Report emailed.
Award: Not Participating,Signer: JF
"A" for Food Safety
Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.
How does it work?
The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.
How can I determine the grade?
The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.
Definitions
- Priority Violation
- Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
- Priority Foundation Violation
- Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
- Core Violation
- Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
- Cutting Edge Program
- All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
| Violation Category | Grade A | Grade B | Grade B | Grade B | Grade B | Grade B | Grade B | Grade B | Grade C | Grade C | Grade C | Grade C | Grade C | Grade C | Grade D | Grade D |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Priority | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | 2 | 2 | 2 | more than 2 | more than 3 |
| Priority Foundation | 0 | 1 | 2 | 3 | 4 | 0 | 1 | 2 | 5 | 3 | 4 | 0 | 1 | 2 | more than 3 | more than 0 |
Any legal action for a pattern of non-compliance or permit suspension results in a D.