Inspection Report

Business Name
Hissho Sushi
Business Address
1566 S HIGLEY RD GILBERT AZ 85296
Permit Number
FD-23-03139
Permit Type
Food Establishment - Food Production
Inspection Purpose
Food Routine Inspection
Inspection Date
11/3/2025
Grade
Not Participating
Priority Violation
2
Inspection Status
Re-inspection required

Violations

Violation #: 15

Description: Food Separated and Protected

Comments:

PRIORITY VIOLATION-3-302.11 (A1-2) - Priority: Packaged and Unpackaged Food-Separation, Packaging, and Segregation; Protection from Cross Contamination. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4621/AMC-Toolbox---Cross-Contamination.

Addl Notes: Observed containers of raw tuna and raw salmon placed on top of containers of cooked crab meat at the sushi prep table. All raw animal proteins must be stored below ready-to-eat (RTE) foods and stored according to cooking temperature at all times to prevent cross contamination. Discussed ways of organizing preparation table so that cross contamination can be prevented and fish can be stored cold. PIC properly stored all raw animal proteins according to the final cooking temperature based on the cooking parameters in § 3-401.11 of the Food Code. Corrective Action: Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed raw tuna, raw salmon, cooked shrimp, tofu, lettuce and various crab meats at 45-50*F in the poke bar service table. Per the operator, the ingredients were loaded into the table two hours prior. All TCS foods improperly cold held were relocated to alternative functioning refrigeration unit to rapidly cool to 41°F at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed all items in the service table loaded two hours prior holding above 41*F. Observed a build-up of ice within the prep table. Discussed having the table serviced prior to loading it for self-service poke sales. Cold holding equipment must have the capacity to maintain TCS foods at 41°F or below. Must repair cold holding equipment such that it maintains TCS foods at 41°F or below. **Re-inspection required** A re-inspection was scheduled for Thursday, 11/13/25. Please contact inspector with any updates.

Violation #: 35

Description: Approved Thawing Methods Used

Comments:

3-501.13 - Core: Thawing Addl Notes: Observed raw salmon and tuna thawing in reach-in cooler near walk-in. Fish was originally stored in ROP packaging but was sliced. Discussed fully removing fish from packaging in the future. All ROP fish labeled "Keep Frozen" must be removed completely from reduced oxygen packaging (ROP) prior to thawing under refrigeration or immediately after thawing under cold running water. All ROP fish was removed from ROP packaging at time of inspection.

Comments/Details


No County legal action will result from this inspection.
Inspection report was e-mailed. Discussed adding another consumer advisory to the self-service poke cooler and provided guidance and printable consumer advisory. Discussed ensuring that a supervisor is signing off on the logbook at a frequency where documented corrective actions can be monitored and verified.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category Grade A Grade B Grade B Grade B Grade B Grade B Grade B Grade B Grade C Grade C Grade C Grade C Grade C Grade C Grade D Grade D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 more than 2 more than 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 more than 3 more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.