Inspection Report

Business Name
Carniceria Y Taqueria Sinaloa III

Business Address
3650 W CAMELBACK RD PHOENIX AZ 85019

Permit Number
FD-23-05523

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
7/18/2024

Grade
C

Priority Violation
2

Inspection Status
Re-inspection required

Violations

Violation #: 21

Repeat Violation

Description: Proper Hot Holding Temperatures

Comments:

A pattern of non-compliance for Priority violation # [3-501.16(A)(1)] has been noted during this inspection. An Active Managerial Control Intervention Visit was offered to the person in charge. Failure to correct repeat violations may result in legal action. AMC Training was offered to establishment.

PRIORITY VIOLATION-3-501.16(A)(1) - Priority: Time/Temperature Control for Safety Food, Hot Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4614/AMC-Toolbox---Hot-Holding.

Addl Notes: Observed various TCS foods, including cooked chicken and beef being hot held (see embargo form for details) near the front of the establishment. Internal temperatures of the food ranged between 98-120F. Per employee, the food had been made earlier in the afternoon prior to his arrival. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 135°F or above. All TCS foods improperly hot held were discarded by PIC at time of inspection. Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed various TCS foods (such as chicken, cut tomatoes, and beans) with an internal temperature ranging from 45-52F being stored in the walk in refrigeration unit. Per employee, the food was 30 minutes prior to inspection. All TCS foods improperly cold held was relocated to an alternative functioning refrigeration unit to rapidly cool to 41°F at time of inspection. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Ambient temperature within walk in refrigeration unit measured between 50-52F. Establishment had certified technician on site during inspection to correct issues with unit. Establishment has provided photos indicating the temperature is now within range, reinspection set 7/22/24. With current refrigeration capacity establishment is only able to cold hold food on premises and does not have space to adequately cool foods or receive any additional food. Per person in charge at least one cooler should be repaired by the end of the week. A re-inspection will be conducted to ensure enough refrigeration is available to handle normal food preparation of establishment. Reviewed with person in charge stopping any advanced food preparations or receiving of food until adequate refrigeration is restored. Correct at once.

Comments/Details

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.