Inspection Report

Business Name
Papa Chevos

Business Address
3125 S ALMA SCHOOL RD CHANDLER AZ 85248

Permit Number
FD-23273

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
2/25/2025

Grade
C

Priority Violation
2

Inspection Status
Completed

Violations

Violation #: 2

Description: Certified Food Protection Manager

Comments:

2-102.12(A) - Core: Certified Food Protection Manager. For a permanent fix to this violation, check out these resources on our website. https://www.maricopa.gov/5114/Food-Restaurants Addl Notes: Observed no CFPM on site at time of inspection. A Certified Food Protection Manager (CFPM) is required to be on the premises during all hours of operation. Corrective Action: Correct prior to next routine inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed red and green house made salsa stored in the reach-in cooler near the register with an internal temperature range of 50F-52F. Per PIC, the salsa has been in the cooler for less than 4 hours prior to inspection. All TCS foods improperly cold held were relocated to alternative functioning refrigeration unit to rapidly cool to 41°F at time of inspection. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Corrective Action: Corrected at time of inspection.

Violation #: 28

Description: Toxic Substances Properly Identified, Stored, and Used; Held for Retail Sale, Properly Stored

Comments:

7-102.11 - Priority Foundation: Common Name-Working Containers Addl Notes: Observed two spray bottles with chemicals for cleaning without labeling. PIC marked bottles with a common name at time of inspection. Working containers used for storing poisonous or toxic materials such as cleaners and sanitizers taken from bulk supplies must be clearly and individually identified with the common name of the material. Corrective Action: Corrected at time of inspection.

PRIORITY VIOLATION-7-201.11 - Priority: Separation-Storage

Addl Notes: Observed two spray bottles being stored above lard, and to-go containers located in the main kitchen area. Chemicals must be stored away from food, utensils, and single service items at all times to prevent contamination. All chemicals were relocated and properly stored by PIC at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed reach-in cooler, near the register, with a minimum ambient air temperature 55.5F, maintaining TCS foods above 41F at time of inspection. The establishment has other cold holding units for storage and for cooling TCS food, no re-inspection is required. Cold holding equipment must have the capacity to maintain TCS foods at 41°F or below. Must repair cold holding equipment such that it maintains TCS foods at 41°F or below. Instructed PIC to not store any TCS foods in unit until the unit is repaired and holding at 41F or below. Corrective Action: Corrected at time of inspection.

Comments/Details

No County legal action will result from this inspection.
Discussed obtaining a bodily fluid clean up kit with PIC prior to next routine inspection, and cooling methods.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.