Inspection Report

Business Name
DiabloPHX

Business Address
222 E PORTLAND ST PHOENIX AZ 85004

Permit Number
FD-24-00250

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
7/14/2025

Grade
Not Participating

Priority Violation
1

Inspection Status
Re-inspection required

Violations

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed multiple TCS food items (assorted cheese, cut spinach, cut tomatoes, dairy butter) measured 44-49'F in tabletop prep cooler located directly opposite of stove. Items observed stored double panned with no direct cooling received. Discussed proper storage to maximize air flow to ensure TCS food items are maintained at proper coldholding temperatures of 41'F and below. PIC stated food items were prepped less than an hour prior, have not been out of temperature for longer than 4 hours. All TCS foods improperly cold held were relocated to alternative functioning refrigeration unit to rapidly cool to 41°F at time of inspection. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Eggs not treated to destroy Salmonellae can be stored in equipment that maintains an ambient air temperature of 45°F or below. 2ND CONSECUTIVE VIOLATION. Corrective Action: Corrected at time of inspection.

Violation #: 23

Description: Proper Date Marking and Disposition

Comments:

3-501.17 - Priority Foundation: Ready-To-Eat Time/Temperature Control for Safety Food, Date Marking. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4125/Food-SafetyOperator-Resources. Addl Notes: Observed cooked beef with datemarking of 07/06 in walk-in unit at time of inspection. PIC stated establishment cooks items in advance and freeze them on day of prep. Informed PIC freezing of cooked items require thawed date on day of thawing for tracking of 7-day datemarking requirement for RTE/TCS food items. Item was thawed the day prior to inspection on 07/13, per PIC. All RTE/TCS foods were properly date marked at the time of inspection. RTE/TCS foods requiring date marking must be date marked within 24 hours and sold or discarded after 7 days (including the day it was made as day 1). Provided datemarking guidance via email. Corrective Action: Corrected at time of inspection.

Violation #: 48

Description: Warewashing Facilities, Installed, Maintained, Used, Test Strips

Comments:

4-302.14 - Priority Foundation: Sanitizing Solutions, Testing Devices. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Observed establishment uses quat sanitizer at 3-compartment sink. Observed quat test strips in good repair missing at time of inspection. The only available quat test strip observed in an unusable and discolored state. Testing devices for sanitizer concentrations shall always be readily accessible. Purchase test strips prior to re-inspection on 07/24/25. Corrective Action: Correct prior to re-inspection.

Comments/Details

No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.