Inspection Report

Business Name
Real Thai & Sushi
Business Address
13749 N LITCHFIELD RD SURPRISE AZ 85379
Permit Number
FD-24-00771
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
7/7/2026
Grade
B
Priority Violation
0
Inspection Status
Completed

Violations

Violation #: 10

Description: Adequate Handwashing Sinks, Properly Supplied and Accessible

Comments:

5-205.11 - Priority Foundation: Using a Handwashing Sink-Operation and Maintenance. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing. Addl Notes: Food equipment and utensils found in basin of sushi area handsink. Maintained handsinks to be accessible at all times for proper hand washing practices. Predefined Comment: PIC relocated all items blocking handwash sink at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 35

Description: Approved Thawing Methods Used

Comments:

3-501.13 - Core: Thawing Addl Notes: Two packages of raw, thawed tuna found in the sushi refrigeration unit in ROP. Predefined Comment: All ROP fish labeled "Keep Frozen" must be removed completely from reduced oxygen packaging (ROP) prior to thawing under refrigeration or immediately after thawing under cold running water. All ROP fish was removed from ROP packaging at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 43

Description: In-Use Utensils; Properly Stored

Comments:

3-304.12 - Core: In-Use Utensils, Between-Use Storage Addl Notes: Ice scoop and ice bucket found stored atop ice maker; yellow handle knifes found stored between small food prep cooler and table. Predefined Comment: In-use utensils must be stored in a clean, dry location; in running water; or in hot water above 135°F. If utensils are stored in food, the handles must be stored above the surface of the food. Corrective Action: Correct prior to next routine inspection.

Violation #: 49

Description: Non-Food-Contact Surfaces Clean

Comments:

4-601.11(B) and (C) - Core: Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils Addl Notes: Residue buildup found on high touch surfaces of equipment and door seal gaskets of refrigeration. Predefined Comment: Nonfood-contact surfaces shall be kept free of an accumulation of dust, dirt, food residue, and other debris. Clean nonfood-contact surfaces at a frequency necessary to preclude accumulation of soil residues. Corrective Action: Correct prior to next routine inspection.

Violation #: 55

Description: Physical Facilities Installed, Maintained, and Clean

Comments:

6-501.12 - Core: Cleaning, Frequency and Restrictions Addl Notes: Residue buildup found on flooring along bases and underneath equipment in food preparation area. Predefined Comment: Physical facility must be cleaned frequently enough to prevent accumulation of dirt, organic matter, and food debris. Must clean physical facility prior to next routine inspection. Corrective Action: Correct prior to next routine inspection.

Comments/Details


Predefined Comment: No County legal action will result from this inspection.
Reviewed facility's procedures and protocols for:
--Consumer Advisory Provided for Raw or Undercooked Food (i.e. -distinguish menu items); _________
--Food and non-food-contact surfaces cleanable, properly designed, constructed and used (i.e. - food containers in freezer unit); ________
--Sponges Use Limitation (i.e. - not to come in contact with in-use food contact surfaces); ________
--Warewashing facilities, installed, maintained, used, test strips (i.e. - precleaning of equipment to remove day dots)
_______________________
Provided following MCESD handout(s) via email:
--Consumer Advisory Guidance

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
A B B B B B B B C C C C C C D D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 2 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 3 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.