Inspection Report

Business Name
MACAYO'S MEXICAN FOOD

Business Address
12637 S 48TH ST PHOENIX AZ 85044

Permit Number
FD-24-02367

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
5/13/2025

Grade
Not Participating

Priority Violation
2

Inspection Status
Completed

Violations

Violation #: 22

Repeat Violation

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: On the top of the main prep line, observed Lettuce at 48*F, Cheese at 53*F, Sour Cream at 52*F, Pico/Cut tomatoes at 45-48*F, beef chimis at 49*F, chicken chimis at 52*F, and green tamale bites at 56*F. In the bottom of the same unit observed rolled tacos at 62*F, Cheese at 53*F, Cabbage at 46*F, Pico at 48*F. Per manager, these items had been in the unit 2.5 to 3 hours prior. The top was placed on time as control. Reviewed time control procedures and documentation requirements. The bottom foods were moved to the walk in cooler to rapidly cool. Predefined Comment: Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Eggs not treated to destroy Salmonellae can be stored in equipment that maintains an ambient air temperature of 45°F or below. Corrective Action: Corrected at time of inspection.

Violation #: 28

Description: Toxic Substances Properly Identified, Stored, and Used; Held for Retail Sale, Properly Stored

Comments:

PRIORITY VIOLATION-7-204.11 - Priority: Sanitizers, Criteria-Chemicals

Addl Notes: In the bar, observed the dishwashing machine dispensing over 500 ppm of quat sanitizer. Sanitizers must be kept in the concentration as stated on the bottle (150 - 400 ppm). Establishment will utilize the back dishwashing machine until this one is dispensing in concentration. Predefined Comment: Discussed approved use of sanitizers with the person-in-charge (PIC). Sanitizer must be used at concentrations and in an approved manner per manufacturer instructions, 40 CFR 180.940, and 40 CFR 180.2020. Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed the prep line coolers closest to the dish pit holding at 47*F on inspector's min/max thermometer. Equipment must be fixed to be holding at 41*F or below. Until repaired establishment will utilize time as control for top portion and not use bottom portion for TCS foods. Establishment has enough cooling equipment to handle a normal service without being inhibited by the loss of the equipment, therefore, no re-inspection will be required. Please have equipment replaced or repaired in order to use temperature control again. Predefined Comment: Cold holding equipment must have the capacity to maintain TCS foods at 41°F or below. Must repair cold holding equipment such that it maintains TCS foods at 41°F or below. Corrective Action: Corrected at time of inspection.

Comments/Details

Predefined Comment: No County legal action will result from this inspection.
A training inspection was offered to the person in charge. Please reach out to the inspector if you would like to schedule a training visit prior to next routine inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.