Inspection Report

Business Name
Subway

Business Address
911 E BROADWAY RD TEMPE AZ 85282

Permit Number
FD-25166

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
10/10/2024

Grade
C

Priority Violation
2

Inspection Status
Completed

Violations

Violation #: 2

Repeat Violation

Description: Certified Food Protection Manager

Comments:

2-102.12(A) - Core: Certified Food Protection Manager. For a permanent fix to this violation, check out these resources on our website. https://www.maricopa.gov/5114/Food-Restaurants Addl Notes: Person in charge indicated there was no Certified Food Protection Manager onsite at time of inspection. Establishment was open and operating. A Certified Food Protection Manager (CFPM) is required to be on the premises during all hours of operation. Corrective Action: Correct prior to next routine inspection. REPEAT VIOLATION (2ND CONSECUTIVE)

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

4-602.11 (E) - Core: Equipment Food - Contact Surfaces and Utensils-Frequency; Non-TCS. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Observed shielding around ice dispenser on soda machine with black gelatinous organic material on it. Non-time/temperature controlled for safety food contact surfaces must be cleaned at a frequency and thoroughness to preclude the buildup of dirt/grime, food debris, and organic material that may contribute to an accumulation of microorganisms. The establishment must establish an adequate cleaning procedure and schedule by the next routine health inspection. Corrective Action: Correct prior to next routine inspection.

4-601.11(A) - Priority Foundation: Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Observed slicer with purple food debris and green staining and pan with food debris stuck on the outside; these were stored with clean equipment and food contact surfaces. The person in charge indicated these food contact surfaces were cleaned prior to being put away. Clean food contact surfaces must be clean to the sight and touch; harmful organisms may grow on food debris left of food contact surfaces after they are cleaned, and food debris may also attract pests. Person in charge indicated these items would be rewashed, rinsed, and sanitized and they were placed in the warewashing area.

Violation #: 21

Description: Proper Hot Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(1) - Priority: Time/Temperature Control for Safety Food, Hot Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4614/AMC-Toolbox---Hot-Holding.

Addl Notes: Observed meatball marinara with internal temperature of 112*F. Person in charge indicated they reheated it ~3 hours before inspection. Except during preparation, cooking, cooling or when time is used as a control all time/temperature controlled for safety (TCS) foods must be maintained at 135°F or above. All TCS foods improperly hot held were discarded by PIC at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed cooked beef, tuna salad, and sliced turkey with internal temperature between 45*F - 48*F in the refrigerated prep unit on the sandwich line. Person in charge indicated that these foods had been in the unit for less than 4 hours and were not prepared today; these foods were placed in the freezer for 10 minutes. Observed all three with internal temperatures under 41*F. Person in charge indicated they did not take internal temperatures today. The measured ambient temperature of the unit using a min/max thermometer when the inspector arrived was 43.3*F and by the time they left it was 40.8*F. Person in charge was instructed to monitor internal temperatures throughout the day to ensure their equipment is working adequately to hold TCS foods at 41*F and below. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Eggs not treated to destroy Salmonellae can be stored in equipment that maintains an ambient air temperature of 45°F or below. Corrective Action: Corrected at time of inspection.

Violation #: 55

Description: Physical Facilities Installed, Maintained, and Clean

Comments:

6-501.12 - Core: Cleaning, Frequency and Restrictions Addl Notes: Observed excess boxes throughout kitchen. Establishment must be cleaned at a frequency that precludes the buildup of grime, food debris, and trash. Cleaning of the physical facilities is an important measure in ensuring the protection and sanitary preparation of food. A regular cleaning schedule should be established and followed to maintain the facility in a clean and sanitary manner. Primary cleaning should be done at times when foods are in protected storage and when food is not being served or prepared. Corrective Action: Correct prior to next routine inspection.

Comments/Details

No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.