Inspection Report

Business Name
Cafe Zupas
Business Address
7480 W BELL RD GLENDALE AZ 85308
Permit Number
FD-34907
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
8/11/2025
Grade
Not Participating
Priority Violation
2
Inspection Status
Re-inspection required

Violations

Violation #: 2

Description: Certified Food Protection Manager

Comments:

2-102.12(A) - Core: Certified Food Protection Manager. For a permanent fix to this violation, check out these resources on our website. https://www.maricopa.gov/5114/Food-Restaurants Addl Notes: No certified Food Manager was present at the time of inspection. In Compliance with the Food Code, Maricopa County requires a Food Manager present during operating hours. Emailed Maricopa Policy changes and additional resources on where to acquire a Food Manager Certification. Corrective Action: Correct prior to next routine inspection.

Violation #: 8

Description: Hands Clean and Properly Washed

Comments:

PRIORITY VIOLATION-2-301.14 - Priority: When to Wash. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing.

Addl Notes: Observed an employee put something in their jean pocket and then immediately don fresh gloves, without first washing their hands. Also observed an employee hang up a phone and then immediately don fresh gloves, without washing their hands first. Both employee were stopped and properly washed hands at handwash sink at time of inspection. Discussed the importance of proper hand washing procedures with the person-in-charge (PIC). Proper handwashing procedure is to rinse hands with warm water, scrub with soap for 10-15 seconds, rinse with warm water, dry with approved drying provision, and turn off in a manner to prevent re-contamination of hands. Entire process should take approximately 20 seconds for full and proper handwashing to prevent spread of pathogens and contamination. Corrective Action: Corrected at time of inspection

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed various sliced cheeses (44-47°F), various sliced deli meats (45-46°F), various dairy-based spreads (44-45°F), cut tomato and sliced lettuce (44-46°F) cold holding above 41°F in the sandwich station prep table. All Time Temperature Control for Safety (TCS) foods in the sandwich station prep table were either placed in an ice bath or moved to alternative functioning refrigeration unit to rapidly cool to 41°F at time of inspection. The prep table measured 44.2°F with the min/max thermometer. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Discussed the importance of routinely checking cold holding temperatures. Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed various Time Temperature Control for Safety (TCS) foods cold holding above 41°F in the sandwich station prep table. TCS foods were either placed in an ice bath or moved to alternative functioning refrigeration unit to rapidly cool to 41°F at time of inspection. The prep table measured 44.2°F with the min/max thermometer. Thermometers were varified as calibrated with staff. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. A reinspection on the sandwich prep table will occur in the next 10 days. Corrective Action: Correct prior to reinspection.

Comments/Details


No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category Grade A Grade B Grade B Grade B Grade B Grade B Grade B Grade B Grade C Grade C Grade C Grade C Grade C Grade C Grade D Grade D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 more than 2 more than 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 more than 3 more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.