Inspection Report

Business Name
Gogi

Business Address
2095 N DOBSON RD CHANDLER AZ 85224

Permit Number
FD-35426

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
10/8/2025

Grade
Not Participating

Priority Violation
1

Inspection Status
Completed

Violations

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed the two cold-holding units across from the cook station that were holding temperatures between 43*F and 45*F. Person in charge (PIC) stated the food (raw meats, cooked vegetables, eggs, noodles, etc.) had been moved to the cold-holding unit about 2-hours prior. PIC stated that a technician has been called and is on the way (same day). PIC moved the food to a colder unit at time of inspection to rapidly cool. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Eggs not treated to destroy Salmonellae can be stored in equipment that maintains an ambient air temperature of 45°F or below. All TCS foods improperly cold held were relocated to alternative functioning refrigeration unit to rapidly cool to 41°F at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 23

Description: Proper Date Marking and Disposition

Comments:

3-501.17 - Priority Foundation: Ready-To-Eat Time/Temperature Control for Safety Food, Date Marking. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4125/Food-SafetyOperator-Resources. Addl Notes: Observed that there were no date markings on foods (cooked noodles, cooked vegetable dishes, etc.) throughout the kitchen in the cold-holding units. Person in charge (PIC) had an employee put dates on the containers at time of inspection. RTE/TCS foods requiring date marking must be date marked within 24 hours and sold or discarded after 7 days (including the day it was made as day 1). All RTE/TCS foods were properly date marked at the time of inspection.

Violation #: 28

Description: Toxic Substances Properly Identified, Stored, and Used; Held for Retail Sale, Properly Stored

Comments:

7-202.11 - Priority Foundation: Restriction-Presence and Use Addl Notes: Observed 4 cans of Raid pest control spray in the kitchen and 1 gallon size bottle of Ortho pest control spray near the back door by a cold-holding unit. Discussed with person in charge (PIC) that pest control spray can never be store on site and that all pest control needs to be done be a certified pest control specialist. PIC removed all pest control from the from the premises at time of inspection. All pest control for the establishment must be performed by a certified pest control specialist and chemicals for pest control must not be stored onsite. PIC removed pest control chemicals from premises at time of inspection. Corrective Action: Corrected at time of inspection.

Comments/Details

No County legal action will result from this inspection. Report emailed.
Observed that one of the drop-in freezer doors are coming off and some of the electrical is popping out and some of the wires are now frozen in the ice. The freezer door insulation is also visible. Person in charge (PIC) should repair or replace the freezer. The frozen food can also be moved to another freezer.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.